3-Methoxybenzyl chloride (CAS 824-98-6; also called m-anisyl chloride, 3-methoxybenzyl chloride, 1-(chloromethyl)-3-methoxybenzene) is a colourless to pale yellow liquid benzyl halide supplied by PolyblueChem at GC assay 98.0% minimum with water 0.5% maximum. It is a building block rather than a commodity: a benzylating agent that installs a 3-methoxyphenylmethyl group on nitrogen, oxygen or carbon, and the immediate precursor to 3-methoxybenzylamine, 3-methoxybenzyl alcohol and 3-methoxyphenylacetonitrile.
It is one of three positional isomers with the same molecular formula, the same molecular weight and, for practical purposes, the same boiling point. 2-methoxybenzyl chloride (CAS 7035-02-1), 3-methoxybenzyl chloride (CAS 824-98-6) and 4-methoxybenzyl chloride (CAS 824-94-2) cannot be told apart by elemental analysis, by mass spectrometry or by molecular weight – only by GC retention, NMR, or the CAS number on the label. Order by CAS and confirm the isomer by analysis.
Basic Information
| CAS Number | 824-98-6 |
| Molecular Formula | C8H9ClO |
| Molecular Weight | 156.61 g/mol |
| PubChem CID | 69994 |
| InChIKey | VGISFWWEOGVMED-UHFFFAOYSA-N |
| Chemical Family | Benzyl halide / aromatic organic intermediate |
| Theoretical chlorine content | 22.64% (35.453 / 156.61) |
| Elemental composition | C 61.35%, H 5.79%, Cl 22.64%, O 10.22% |
Specifications
| Parameter | Limit | Method |
|---|---|---|
| Assay | 98.0% min | GC |
| Water | 0.5% max | Karl Fischer |
| Positional isomers (2- and 4-methoxybenzyl chloride) | on request | GC |
| 3-Methoxybenzyl alcohol and dibenzyl ether | on request | GC |
| Total chlorine | on request (theoretical 22.64%) | Titration |
Other items are reported on the certificate of analysis for the actual batch. Because two parameters (GC assay and water) do not describe the 2% that is not the main component, state your isomer and hydrolysis limits in the enquiry and we will quote against them.
Why Two Specifications Are Not Enough
A GC assay of 98% min plus water of 0.5% max pins down the main peak and the starting point of hydrolysis, but it leaves the identity of the remaining 2% open. In practice that 2% can be two very different things, and the two point to different causes with different remedies.
| Impurity | CAS | Chlorine content | What it tells you |
|---|---|---|---|
| 3-Methoxybenzyl alcohol | 6971-51-3 | 0% (C8H10O2, MW 138.16) | Hydrolysis during storage or handling – a moisture and stabiliser problem |
| Bis(3-methoxybenzyl) ether | – | 0% (C16H18O3, MW 258.32) | Alcohol has already met a second molecule of benzyl chloride – advanced hydrolysis |
| 3-(Dichloromethyl)anisole | – | 37.1% (C8H8Cl2O, MW 191.06) | Over-chlorination at the benzylic carbon – a reaction control problem |
| 2- or 4-methoxybenzyl chloride | 7035-02-1 / 824-94-2 | 22.64% (isomer) | Incomplete separation of the positional isomer upstream – a purity problem you cannot fix |
This is why a total chlorine titration is worth the five minutes it takes. If the batch is 98% benzyl chloride and the 2% is alcohol or ether, total chlorine comes out near 0.98 x 22.64 = 22.2%. If that 2% is dichloromethyl compound instead, total chlorine climbs above the theoretical figure. One number then separates a storage failure from a reactor failure – and only one of those is the customer’s fault.
Handling, Storage and the Hydrolysis Chain
Benzyl chlorides are lachrymators and skin corrosives; work under local exhaust ventilation, with goggles, chemical-resistant gloves and a face shield for drum quantities. The vapour is heavier than air and irritates eyes at low concentration.
The water specification is a stability specification, not a purity decoration. Hydrolysis proceeds in two steps, and the first one is autocatalytic because it releases hydrogen chloride:
- Hydrolysis: ArCH2Cl + H2O gives ArCH2OH + HCl
- Ether formation: ArCH2OH + ArCH2Cl gives ArCH2-O-CH2Ar + HCl
Run the arithmetic on the specification and the number is larger than most buyers expect: 0.5% water is 5 g per kg, which is 0.278 mol, and 0.278 mol of water can hydrolyse 0.278 mol of the benzyl chloride, that is 43.5 g – 4.3% of the drum. The same reaction releases 10 g of HCl per kg of product, which both drops the pH and attacks unlined carbon steel. Two practical consequences: keep 0.2% water as an internal target rather than treating 0.5% as comfortable, and confirm with the supplier whether the product is supplied with an acid-scavenging stabiliser such as potassium carbonate, as the 4-methoxy isomer usually is.
Store in tightly closed polyethylene or lined-steel containers, out of direct sunlight, below about 25 degC, and preferably under dry nitrogen for long storage. Avoid contact with water, alcohols, amines, strong bases and iron. Methoxy substitution makes the benzylic carbon more reactive than in unsubstituted benzyl chloride, because the electron-donating methoxy group stabilises the cationic transition state – so 3-methoxybenzyl chloride hydrolyses and solvolyses faster than benzyl chloride itself.
Applications
- N-alkylation. Reaction with primary and secondary amines, amides, imidazoles and pyrazoles installs the 3-methoxybenzyl group. Compared with the 4-methoxy (PMB) group this is a skeleton element, not a protecting group: PMB ethers and amines are designed to be removed later with DDQ or acid, whereas a 3-methoxybenzyl group is normally built in to stay.
- O-alkylation. Phenols, alcohols and carboxylic acids give the corresponding 3-methoxybenzyl ethers and esters.
- Nitrile route to arylacetic acids. Displacement with sodium or potassium cyanide gives 3-methoxyphenylacetonitrile (C9H9NO, MW 147.17), which hydrolyses to 3-methoxyphenylacetic acid (C9H10O3, MW 166.17) – a fragment used in several pharmaceutical and fragrance syntheses.
- Isothiocyanate and thiourea chemistry. Reaction with thiocyanate salts gives 3-methoxybenzyl isothiocyanate, a precursor to thioureas and to 3-methoxybenzylamine derivatives.
- Amino and alcohol building blocks. Ammonolysis gives 3-methoxybenzylamine (C8H11NO, MW 137.18); hydrolysis gives 3-methoxybenzyl alcohol (CAS 6971-51-3).
Chemical Structure
COC1=CC=CC(=C1)CCl
FAQ
How do I distinguish 3-methoxybenzyl chloride from the 2- and 4-isomers? Not by formula, molecular weight or mass spectrometry – all three are C8H9ClO at 156.61. Use GC retention against authentic standards, 1H NMR aromatic coupling patterns, or rely on the CAS number and a batch-specific COA.
Why does the specification list water so prominently? Because water is the first step of a self-accelerating hydrolysis chain that converts the product to alcohol and then to a dibenzyl ether, releasing hydrogen chloride as it goes. 0.5% water is already enough to hydrolyse 4.3% of the drum in theory.
Is it supplied with a stabiliser? Ask per batch. The 4-methoxy isomer is commonly sold over potassium carbonate as an acid scavenger; for 3-methoxybenzyl chloride the stabiliser package depends on the factory and should be stated on the COA.
What packaging and quantities are available? Small lots in polyethylene bottles or lined drums and bulk lots in lined steel drums or IBCs, typically from 1 kg to a few tonnes. State the size, the isomer limits and the water target in the enquiry.
Related Products and Reading
- 4-Methoxybenzyl chloride (CAS 824-94-2) – the PMB protecting-group isomer
- 3-Methoxybenzyl alcohol (CAS 6971-51-3) – its hydrolysis product and a building block in its own right
- 3-Methoxybenzaldehyde (CAS 591-31-1) – upstream aldehyde for the reduction-chlorination route
- 3-Methoxytoluene (CAS 100-84-5) – the side-chain chlorination feedstock
- 3-Methoxybenzyl isothiocyanate (CAS 75272-77-4) – direct downstream derivative
- Benzyl chloride (CAS 100-44-7) – the unsubstituted parent
- Anisole (CAS 100-66-3) – the reason the 3-isomer cannot be made by direct chloromethylation
For isomer selection, impurity fingerprinting and storage practice in long form, read methoxybenzyl chloride isomers compared, 3-methoxybenzyl chloride: manufacture and use and hydrolysis, storage and stabilisers for benzyl chloride derivatives. Contact PolyBlueChem for a COA, a sample and a quotation – state the isomer limits and water target you need.




