Isatin-3-Oxime, CAS: 607-28-3

Isatin-3-oxime (CAS 607-28-3), also traded as isatin β-oxime, β-isatoxime or 3-(hydroxyimino)indolin-2-one, is the 3-oxime derivative of isatin and the standard entry point to 3-substituted oxindole chemistry. PolyBlueChem supplies isatin-3-oxime as a light yellow crystalline solid, purity 99% min, with per-batch COA and SDS; small-lot and custom quantities are our normal mode of supply rather than an exception.

Specifications

Property Specification
Appearance Light yellow crystal
Purity (HPLC) 99.0% min
Water content Confirmed per batch on the COA
Residual solvents Confirmed per batch on the COA
Heavy metals Confirmed per batch on the COA
Solubility Sparingly soluble in water; soluble in polar aprotic solvents such as DMF and DMSO
Storage Sealed, cool, dry and protected from light

Batch-specific values for water content, residual solvents and heavy metals are stated on the certificate of analysis supplied with each lot. If your specification needs an additional test – a residual solvent set for a specific market, a particle-size requirement, or an impurity profile against a reference standard – state it in the enquiry and it will be quoted as part of the lot specification rather than added afterwards.

What this material actually is: a tautomeric pair

Isatin-3-oxime is drawn and sold as the oxime of a 2,3-indolinedione, but in the solid state and in solution it sits in equilibrium with its nitroso-enol form, 3-nitroso-1H-indol-2-ol. That is not a formality: standard nomenclature indexes the compound under both descriptions, and the pale yellow colour comes from the nitroso chromophore rather than from the oxime itself. Two practical consequences follow.

  • Chromatography: a single HPLC peak at 99% purity does not by itself prove the absence of the ring-opened or nitroso tautomer – both can elute as one peak. If tautomer ratio matters for your process, specify it as a method requirement, not as a purity figure.
  • Reaction behaviour: the tautomeric mixture can react through either the oxime oxygen or the enol oxygen, which is why O-substitution reactions (sulfonylation, alkylation, Neber-type rearrangements) are sensitive to solvent, base and temperature in a way that simple ketoximes are not.

The oxime geometry is a second variable: the (3E) configuration is the form normally encountered, but E/Z ratio is a specification item that most catalogues leave unstated. Ask for it explicitly if your downstream step is stereosensitive.

Basic Information

CAS number 607-28-3
Chemical name Isatin-3-oxime; 1H-indole-2,3-dione 3-oxime; 3-(hydroxyimino)indolin-2-one
Synonyms in trade Isatin β-oxime, β-isatoxime, 3-oximeindole-2,3-dione, indoline-2,3-dione 3-oxime
Formula / MW C8H6N2O2 / 162.15 g/mol
PubChem CID 69084
Tautomeric form indexed as 3-nitroso-1H-indol-2-ol
Type Indolinone oxime; oxindole building block

Where it goes downstream

  • 3-Aminooxindole – reduction of the oxime gives 3-aminoindolin-2-one, one of the most useful oxindole building blocks and the gateway to 3-amido oxindole kinase-inhibitor scaffolds.
  • Oxindole-based pharmaceutical routes – 3-substituted indolin-2-ones appear in a number of kinase programmes, including the nintedanib route where a 3-aminooxindole intermediate is acylated onwards.
  • Rearrangement chemistry – O-activated derivatives of the oxime undergo Neber-type rearrangement to α-aminoketone equivalents, a route to ring-functionalised indoles.
  • Dye and pigment intermediates – isatin-derived oximes and hydrazones are used as colourant intermediates.

Isatin-3-oxime is a research and industrial intermediate, not a finished active substance; it is supplied for synthesis and manufacturing use.

Custom and small-lot supply

Item What we normally do
Quantity From gram-scale samples for route screening through to kilogram and tonne quantities for commercial campaigns
Batch size Agreed against your consumption rate rather than fixed: a customer running one campaign a year does not need a tonne of inventory
Specification Built with you on the first lot – appearance and assay first, then whichever additional tests your downstream step actually needs
Documentation COA and SDS with every lot; method statements and third-party testing on request
Confidentiality NDA where the specification or the end use has to be shared to quote accurately

Because demand for this intermediate is project-driven rather than continuous, the useful conversation is about your route and your timeline, not about catalogue volume. Tell us the downstream step you are running and the quantity you need to reach your next milestone, and the quotation is built around that.

Packaging and supply

Supplied in foil bags or fibre drums with an inner liner; laboratory quantities in sealed bottles. The pack size follows the batch that you will actually consume, since a hygroscopic-free but light-sensitive solid gains nothing from being stored in bulk. Each lot ships with a certificate of analysis and safety data sheet, and FOB or CIF terms are quoted against your destination. Where the material is going into a regulated pharmaceutical supply chain, say so at enquiry stage: the documentation package and the lot qualification then get built in from the first batch rather than retrofitted.

Further reading

Related products

PolyBlueChem supplies isatin-3-oxime (CAS 607-28-3), purity 99.0% min, light yellow crystal, with per-batch COA and SDS and FOB/CIF delivery. Send your downstream step, quantity and destination, and we will confirm the lot specification and lead time.

Scroll to Top