4-Ethynylphthalic Anhydride, CAS: 73819-76-8

4-Ethynylphthalic anhydride (CAS 73819-76-8) is phthalic anhydride carrying a terminal alkyne. The alkyne is the reason it exists: on heating, terminal acetylenes undergo addition and cyclotrimerisation without producing volatiles, so a polyimide end-capped or chain-extended with this anhydride cures by an addition pathway rather than by condensation – no water, no voids, and a higher use temperature than a thermoplastic will tolerate.

Status: Specification below is the current production grade. Assay, acid value and residual solvent are confirmed per lot; the alkyne is sensitive to light and heat, so packaging and shipping history are part of the specification.

Basic Information

CAS Number 73819-76-8
Chemical name 4-Ethynylphthalic anhydride; 5-ethynylisobenzofuran-1,3-dione
Molecular Formula C10H4O3
Molecular Weight 172.14 g/mol
PubChem CID 11321228
InChIKey DXJLXGJIZZNCBO-UHFFFAOYSA-N
Chemical Family Ethynyl-substituted aromatic anhydride
Reactive groups 1 anhydride ring + 1 terminal alkyne
Anhydride equivalent weight 172.14 g/eq

Specification

Item Requirement
Appearance Light yellow solid powder
Purity (assay) 99% min
Anhydride equivalent weight 172.14 g/eq
Acid value, after hydrolysis 652.0 mg KOH/g theoretical (2 carboxyl equivalents)
Storage Cool, dry, protected from light; alkyne-bearing material ages

Why a terminal alkyne

Thermosetting polyimides need a crosslink that does not release small molecules. Condensation imidisation releases water, which is why thick laminates are ramped slowly and why void content is the usual failure mode. An alkyne cures by addition:

  • No volatiles. The alkyne reacts with itself – addition and cyclotrimerisation to aromatic rings – so the cured network is built without a condensation by-product. Void-free thick sections become achievable.
  • High use temperature. The crosslinks formed are aromatic, so the cured resin keeps its modulus well above the glass transition of the thermoplastic analogue.
  • Processing window. The alkyne is latent at melt-processing temperatures and reacts on a schedule you set with time and temperature; that is what makes resin-transfer moulding of a polyimide possible at all.
  • The trade. High reactivity also means a narrow window. Neat 4-ethynylphthalic anhydride is not a material to leave on a warm bench: light, heat and time all consume the alkyne, and the analytical signature is a falling alkyne band rather than a fall in assay.

Terminal alkyne against phenylacetylene: 4-ethynyl vs PEPA

Product CAS Formula / MW End group Behaviour
4-Ethynylphthalic anhydride 73819-76-8 C10H4O3 / 172.14 Terminal alkyne, directly on the ring Higher reactivity, lower cure temperature, narrower window
4-Phenylethynylphthalic anhydride (PEPA) 119389-05-8 C16H8O3 / 248.24 Phenylacetylene, one phenyl spacer Wider processing window, higher cure temperature, tougher cured network
Nadic anhydride (NA) 826-62-0 C9H8O3 / 164.16 Norbornene double bond Addition cure through the ring double bond; different mechanism, lower temperature
Maleic anhydride 108-31-6 C4H2O3 / 98.06 Electron-poor double bond Diels-Alder and Michael routes; also a cure site

The phenyl spacer in PEPA is not decoration. It separates the reactive alkyne from the rigid imide backbone, which delays the onset of cure and widens the window enough for real part fabrication; the price is 76 g/mol of extra mass per end group and a higher cure temperature. Choose 4-ethynylphthalic anhydride when the schedule is short and the part is small, and PEPA when the part is thick and the tooling takes hours to fill.

Where it is used

Application Role Note
Addition-cure polyimide (PMR-type) resins Chain-end or backbone alkyne for volatile-free crosslinking Melt processing above the imide Tg, then cure on a ramp
High-temperature composites and adhesives Crosslinks that survive above 300 degC service Void control is the yield driver
Click chemistry building block Terminal alkyne for copper-catalysed or strain-promoted azide-alkyne cycloaddition Keep copper out of the cure if the alkyne is meant for thermal crosslinking
Epoxy modification Anhydride reacts with epoxy; the alkyne adds a second, later cure stage Gelation control is critical – the alkyne stage must come after shaping

Handling, packaging and supply

Store in a cool, dry, dark place in tightly closed containers, away from peroxides, radical sources and amines. The alkyne is thermally sensitive; do not store near heat sources or leave material in a sunlit area. Supplied in 1 kg and 5 kg foil-lined packs under nitrogen, or 25 kg fibre drums on request. COA covers appearance, assay and acid value; residual solvent and alkyne content (by NMR or IR) on request. Ship by air for sample quantities to shorten the time at ambient temperature. Export classification normally follows HS 2917.20.

FAQ

What is the difference from PEPA? PEPA (CAS 119389-05-8, C16H8O3, 248.24) carries a phenylacetylene end group; this product carries a terminal alkyne directly on the ring. Same class of chemistry, different cure window and different cured network.

Does it need a catalyst to crosslink? No – thermal addition and cyclotrimerisation proceed without one, which is the point. Catalysts shorten the schedule but also shorten the shelf life.

How do I know the alkyne is still intact? Assay alone is blunt. Ask for the alkyne band in the IR or the proton count in NMR; a lot that has aged shows reduced alkyne signal before the assay moves.

Contact PolyBlueChem for a lot COA, a 1 kg nitrogen-purged sample and a quotation against your volume and destination port.

Related reading

Related Products

Scroll to Top