5,5′-Ethylidenebis(Phthalic Anhydride), CAS: 22197-42-8

5,5′-Ethylidenebis(isobenzofuran-1,3-dione) (CAS 22197-42-8) is the one-carbon-longer sibling of the methylene-bridged dianhydride: two phthalic anhydride units joined through a CH(CH3) bridge instead of a CH2. The extra carbon and the side methyl do two things at once – they soften the crystal lattice and they stiffen the hinge slightly – which is why this grade is chosen when the methylene version will not stay in solution or when a less crystalline, more easily processed powder is needed.

Status: Specification below is the current production grade. Assay, acid value, water and isomer content are confirmed per lot on request.

Basic Information

CAS Number 22197-42-8
Chemical name 5,5′-Ethylidenebis(isobenzofuran-1,3-dione); 4,4′-ethylidenediphthalic anhydride
Molecular Formula C18H10O6
Molecular Weight 322.27 g/mol (structure-calculated; no PubChem structure record exists for this CAS)
PubChem CID Not assigned
Chemical Family Bis(phthalic anhydride), ethylidene bridged
Anhydride groups per molecule 2
Anhydride equivalent weight 161.14 g/eq

Specification

Item Requirement
Appearance Off-white to light yellow solid powder
Purity (assay) 98% min
Anhydride equivalent weight 161.14 g/eq (322.27 / 2)
Acid value, after hydrolysis 348.2 mg KOH/g theoretical (4 carboxyl equivalents)
Bridge -CH(CH3)-, one carbon longer than the methylene analogue

One documentation point to be aware of on this product: the CAS number is in commercial use and the material is well characterised by suppliers, but PubChem carries no structure record, so a molecular weight taken from a public database search will come back empty. The 322.27 g/mol figure above is calculated from C18H10O6 and is the one to use in stoichiometry; verify against your own certificate rather than a database.

Methylene against ethylidene: 14 grams of molecule, different behaviour

Property Methylene bridge Ethylidene bridge Consequence
CAS 4200-79-7 22197-42-8 Two separate products, not grades of one
Formula / MW C17H8O6 / 308.24 C18H10O6 / 322.27 One CH2 more: +14.03 g/mol
AEW 154.12 161.14 4.6% more material per anhydride equivalent
phr at EEW 185, r = 0.9 75.0 78.4 Small dose shift, same order of magnitude
Bridge shape -CH2-, free rotation -CH(CH3)-, methyl adds steric bulk Lower crystallinity, better solubility
Assay grade offered 99% min 98% min Methylene version is sold tighter

A 14 g/mol difference sounds trivial and is not, because it changes packing rather than reactivity. The crystalline lattice of the ethylidene compound is interrupted by the methyl group, so it dissolves faster and cakes less but gives up some of the tight packing that makes a powder easy to handle.

Where it is used

Application Role Note
Soluble polyimide and poly(amic acid) solutions Non-planar bridge disrupts packing and improves dissolution Dry solvent and dry powder both matter – hydrolysis is fast
Flexible films and coatings Tougher than a PMDA film at similar imidisation temperature Expect pale colour rather than water-white
Epoxy curing High functionality solid hardener: 78.4 phr at EEW 185, r = 0.9 Blend with flexible anhydride to avoid brittleness
Polyester and alkyd modification Fast half-ester formation with polyols Functionality is high; watch viscosity rise

Handling, packaging and supply

Store cool and dry in closed containers; both anhydride rings open with moisture and the acid value climbs. Supplied in 25 kg net fibre drum with double polyethylene liner, nitrogen blanketed on request; 1 kg sample packs with desiccant. Keep away from amines and alkaline materials. COA covers appearance, assay and acid value; water content and residual solvent on request. Export classification normally follows HS 2917.20.

FAQ

Is this interchangeable with the methylene-bridged dianhydride? No. Same application space, different CAS and 14 g/mol apart in molecular weight – the dose moves by about 4.6% and the crystallinity changes. Requalify, do not substitute.

Why is there no PubChem entry? The substance is commercially established but is not indexed with a structure record. Use the calculated MW of 322.27 for C18H10O6 and the COA for everything else.

How do I check for hydrolysis? Acid value against the theoretical 348.2 mg KOH/g after hydrolysis. A low reading means some rings are already open.

Contact PolyBlueChem for a lot COA, a sample and a quotation against your volume and destination port.

Related reading

Related Products

Scroll to Top