Hexahydrophthalic Anhydride (HHPA), CAS: 85-42-7

Hexahydrophthalic anhydride (HHPA, CAS 85-42-7) is the fully hydrogenated analogue of tetrahydrophthalic anhydride: a white, low-melting cycloaliphatic anhydride with no residual double bond, a crystallisation point around 34 to 38 deg C and an iodine value below 1.0 g/100 g. It is the anhydride of choice for epoxy systems that have to stay colour-stable in service, for electrical and optical castings, and for outdoor coatings where an unsaturated ring would yellow.

Basic Information

CAS Number 85-42-7
Synonyms HHPA; hexahydrophthalic anhydride; cyclohexane-1,2-dicarboxylic anhydride
Molecular Formula C8H10O3
Molecular Weight 154.16 g/mol
Anhydride groups per molecule 1
Anhydride equivalent weight 154.16 g/eq (theoretical)
PubChem CID 85689
InChIKey MUTGBJKUEZFXGO-UHFFFAOYSA-N
SMILES C1CCC2C(C1)C(=O)OC2=O
IUPAC name 3a,4,5,6,7,7a-hexahydro-2-benzofuran-1,3-dione
Appearance White solid, flake or fused
Crystallisation point 34 to 38 deg C (specified)
Iodine value <=1.0 g I2/100 g
Chemical family Cycloaliphatic dicarboxylic anhydride, saturated

Specifications

Item Grade 1 (standard) Grade 2 (custom)
Appearance White solid White solid
Assay >=99.0% >=99.5%
Colour, Hazen/APHA <=20 As agreed
Iodine value <=1.0 g I2/100 g As agreed
Crystallisation point 34 to 38 deg C As agreed
Free acid – <=0.1% or <=0.2%
Ash – <=0.005%
Silicon-free anti-shrinkage test – Compliant

Reading the Two Numbers That Matter

The iodine value is a hydrogenation completeness check, and it is the most informative line on the certificate. A fully saturated HHPA molecule has no double bond and therefore no iodine uptake. If one double bond were still present, the theoretical iodine value of this molecule would be about 164.6 g I2/100 g (253.81 g of iodine per mole divided by 154.16 g/mol, expressed per 100 g). A limit of 1.0 g I2/100 g therefore caps the residual unsaturation at roughly 0.6 mol per cent, which is the same as saying the hydrogenation is at least 99.4% complete.

Measured iodine value Residual double bond, mol% Equivalent THPA content in the lot Interpretation
0.2 About 0.12 About 0.12% Excellent hydrogenation
1.0 (limit) About 0.61 About 0.6% At the specification limit
3.0 About 1.8 About 1.8% Either incomplete hydrogenation or a THPA blend
10 About 6 About 6% Not acceptable for colour-critical work

That third column is the reason buyers of colour-critical castings watch iodine value rather than only assay. Because tetrahydrophthalic anhydride has one double bond per molecule, any THPA left in an HHPA lot shows up directly in the iodine value, and it is the species that yellows under heat and ultraviolet light. A 99% assay with a 6% iodine value is a product that will pass a purity check and fail an outdoor weathering test.

The crystallisation point tells you about isomer composition and about transport. HHPA exists as cis and trans isomers, and the crystallisation point of a commercial lot reflects their ratio rather than a single pure compound melting point. A crystallisation point at the low end of the 34 to 38 deg C band means more of the lower-melting isomer. That is useful to know in the plant, and it is decisive in logistics: a container in a summer yard can exceed 40 deg C, so an HHPA lot can arrive fused or partially melted. The chemistry survives, but the physical form changes and the drum has to be re-melted and mixed before sampling or dosing.

Why Saturation Matters in Application

The difference between HHPA and the tetrahydrophthalic anhydrides is one double bond, and in service that double bond is the difference between colour-stable and yellowing.

Property HHPA 1,2,3,6-THPA Consequence
Formula / MW C8H10O3 / 154.16 C8H8O3 / 152.15 Two hydrogen atoms, 2.02 g/mol
Ring double bond None One, isolated HHPA cured parts resist yellowing; THPA parts can be crosslinked further
Melting / crystallisation point 34 to 38 deg C About 100 deg C HHPA is handled molten; THPA is handled as flake
Anhydride equivalent weight 154.16 152.15 About 1.3% more HHPA per equivalent
Typical cured-part character Light-stable, low colour, good dielectric Higher heat resistance, darker on overbake Different end uses, not better or worse

Applications

  • Epoxy curing agent for colour-critical and outdoor systems. Because there is no unsaturated ring to oxidise, HHPA-cured epoxy keeps its colour better than the tetrahydrophthalic grades, which is why it appears in LED and optoelectronic potting, transparent castings, and white or light-coloured electrical parts.
  • Electrical insulation. Cast transformers, instrument transformers and sensor potting where a low-viscosity melt, low exotherm and high glass transition are wanted together.
  • Powder coatings and industrial coatings requiring weathering and colour stability, including systems cured with solid anhydride hardeners.
  • Base material for methylhexahydrophthalic anhydride (MHHPA), the liquid analogue widely used where a room-temperature-stable liquid anhydride is needed.
  • Polyester, alkyd and plasticiser intermediate through ring opening with alcohols and glycols.

Formulating With HHPA

phr = (AEW / EEW) x 100 x r, with AEW = 154.16 and r normally 0.85 to 1.0.

Resin EEW r = 0.85 r = 0.90 r = 1.00
185 (standard DGEBA) 70.8 phr 75.0 phr 83.3 phr
200 65.5 phr 69.4 phr 77.1 phr
250 52.4 phr 55.5 phr 61.7 phr

HHPA is often blended with MHHPA or with a tetrahydrophthalic anhydride to adjust the melting range and the working viscosity, and cure is normally accelerated with a tertiary amine, an imidazole or a quaternary ammonium salt at 120 to 160 deg C with a post-cure step.

Handling and Storage

HHPA is supplied as a low-melting solid, so the practical handling question is usually whether to keep it solid in a temperature-controlled store or keep it molten in a heated tank. Both work; mixing the two does not. A drum that has partially melted and been drawn from will deliver material of the wrong composition, so re-melt completely and homogenise before sampling.

The material is moisture sensitive and corrosive once hydrolysed, and it is a skin and respiratory sensitiser. Handle molten HHPA with face protection and impervious gloves, provide local exhaust at the filling point, and keep the melt covered. Do not store next to amines, accelerators, alkalis or alcohols, and do not allow water into a melt tank.

Keep the store below the point at which the product softens. For hot-climate destinations, specify an insulated or temperature-controlled container and expect to re-melt on arrival.

Packaging and Supply

Standard packing is 25 kg net in paper sacks with a polyethylene inner liner, or in lined steel drums of 200 to 250 kg for customers who melt the product. Bulk supply in heated containers or in 1,000 kg jumbo bags with a moisture barrier is available. Each lot carries a certificate of analysis with assay, colour, iodine value, crystallisation point and, for the custom grade, free acid, ash and the declared silicon-free anti-shrinkage compliance.

Chemical Structure

C1CCC2C(C1)C(=O)OC2=O

Related Products

FAQ

Why does HHPA have an iodine value specification instead of a double-bond test? Because iodine value is the standard, cheap and reproducible way to express residual unsaturation, and it maps directly onto hydrogenation completeness. One double bond in this molecule would read as about 164.6 g I2/100 g, so any figure well under 1.0 confirms a nearly fully saturated product.

Is HHPA a liquid? No, it is a low-melting solid with a crystallisation point around 34 to 38 deg C. It is frequently handled molten, and it can arrive melted if the container got hot in transit. MHHPA, its methyl analogue, is the liquid product in this family.

Can I use HHPA and THPA interchangeably? No. The equivalent weights are close (154.16 versus 152.15), so the phr calculation barely changes, but HHPA has no double bond and THPA has one. That changes colour stability, weathering, heat resistance and the possibility of later crosslinking. Check the end-use requirement, not just the dose.

What does the 99.5% custom grade add? Tighter control of free acid (0.1 to 0.2%), ash below 0.005% and the declared silicon-free anti-shrinkage compliance. These are the numbers that matter for electrical and optical castings where ionics and shrinkage show up in the finished part.

How sensitive is HHPA to moisture in storage? Every anhydride is moisture sensitive, and HHPA in a molten state is worse because the water disperses. Keep the melt dry and covered, and check free acid after any long storage or after arrival of a container that may have been heated.

Contact PolyblueChem for a current certificate of analysis, a sample, and a quotation for bagged, drummed or bulk HHPA.

Scroll to Top