Allylsuccinic anhydride (CAS 7539-12-0) is a small, mobile liquid anhydride with an allyl side chain. It carries two independent reactive handles on a 140 g/mol molecule: the anhydride ring, which cures epoxy and esterifies polyols, and the allyl double bond, which crosslinks by peroxide or sulphur chemistry. That combination is why it appears both as a low-viscosity epoxy hardener and as an allylating building block.
Status: Specification below is the current production grade. Assay, colour and water content are confirmed per lot on request.
Basic Information
| CAS Number | 7539-12-0 |
| Chemical name | Allylsuccinic anhydride; 3-allyldihydrofuran-2,5-dione; 2,5-furandione dihydro-3-(2-propenyl)- |
| Molecular Formula | C7H8O3 |
| Molecular Weight | 140.14 g/mol |
| PubChem CID | 111009 |
| InChIKey | WUMMIJWEUDHZCL-UHFFFAOYSA-N |
| Chemical Family | Alkenyl succinic anhydride (short chain, liquid) |
| Reactive groups | 1 anhydride ring + 1 allyl double bond |
| Anhydride equivalent weight | 140.14 g/eq |
Specification
| Item | Requirement |
| Appearance | Colourless transparent liquid |
| Purity (assay) | 99% min |
| Anhydride equivalent weight | 140.14 g/eq |
| Acid value, after hydrolysis | 800.8 mg KOH/g theoretical (2 carboxyl equivalents) |
| Iodine value, theoretical | 181.1 (one C=C per molecule: 253.81 / 140.14 x 100) |
| State at ambient | Liquid – no melting step required |
A small molecule with a big equivalent-weight advantage
Most liquid anhydride hardeners used in epoxy are bulky: MTHPA is 166 g/eq, MHHPA 168, DDSA 266. This one is 140, and the difference is not cosmetic – it decides how much material goes into the pot:
| Hardener | CAS | MW / AEW | phr at EEW 185, r = 0.9 | State | Second reactive group |
| Allylsuccinic anhydride | 7539-12-0 | 140.14 | 68.2 | Liquid | Allyl (peroxide / sulphur cure) |
| Methyl tetrahydrophthalic anhydride | 11070-44-3 | 166.17 | 80.8 | Liquid | None |
| Methylhexahydrophthalic anhydride | 25550-51-0 | 168.19 | 81.8 | Liquid | None |
| Dodecenylsuccinic anhydride | 26544-38-7 | 266.38 | 129.6 | Liquid | Long alkenyl chain (flexibility) |
| Succinic anhydride | 108-30-5 | 100.07 | 48.7 | Solid | None |
The low equivalent weight also means the hardener contributes less mass to the cured network per crosslink, which raises the calculated crosslink density – useful, but it hardens and embrittles if the resin is not chosen to match. Where DDSA is used to plasticise, this product does the opposite.
Two cure stages, one molecule
- Stage one, anhydride-epoxy. With an accelerator (typically an imidazole or a tertiary amine) the ring opens and esterifies the resin at 120 to 160 degC. Standard anhydride arithmetic applies: 68.2 phr against EEW 185 at r = 0.9.
- Stage two, allyl. The allyl group crosslinks with peroxides at elevated temperature or with sulphur systems. Because it is a separate mechanism, it can be triggered after the part is shaped, which is what makes the molecule interesting for composites and adhesives: shape first, then lock the network with a second, higher-temperature step.
- The trap. Allyl groups are prone to chain transfer and to premature gelation if peroxide is added before shaping. Keep the two stages physically separated in the process, not just in temperature.
Where it is used
| Application | Role | Note |
| Low-viscosity epoxy casting and impregnation | Liquid hardener that lowers mix viscosity without a reactive diluent | Pot life shortens as accelerator level rises |
| Two-stage cure composites and adhesives | Anhydride stage for handling strength, allyl stage for final properties | Sequence the peroxide addition after shaping |
| Allylating and enophile building block | Allyl group for introduction chemistry; anhydride as the electrophile | Also used in Diels-Alder work as an enophile |
| Polyester and alkyd modification | Half-ester opens fast with polyols, allyl provides air-dry unsaturation | Watch viscosity build during the cook |
Handling, packaging and supply
The liquid is moisture sensitive – keep drums closed under dry air or nitrogen, and expect free acid to rise if a drum is left open. Store away from peroxides, initiators, amines and strong bases. Supplied in 200 kg steel drums, 25 kg plastic drums and 1000 kg IBC on request. COA covers appearance, assay, acid value and water; iodine value on request as an alkyne-free confirmation of the allyl content. Export classification normally follows HS 2917.20.
FAQ
Can it replace DDSA for flexibility? No – it does the opposite. DDSA at 266 g/eq adds a long soft chain and lowers crosslink density; allylsuccinic anhydride at 140 g/eq raises it. Use DDSA to plasticise, this product to tighten the network or to add a second cure stage.
Why is the dose so much lower than MTHPA? Equivalent weight. 140.14 against 166.17 g/eq is 16% less material per equivalent, and the phr moves from 80.8 to 68.2 at EEW 185, r = 0.9.
How do I confirm the allyl group is intact? Iodine value against the theoretical 181.1, or NMR. A low iodine value on a lot that passes assay means the double bond has been consumed somewhere in storage.
Contact PolyBlueChem for a lot COA, a sample and a quotation against your volume and destination port.
Related reading
- The anhydride family map: every product, the AEW scale and the identification traps
- Anhydride curing agent dosage: phr from AEW and EEW
- Liquid anhydride hardeners for electrical casting: MNA, MTHPA and MHHPA
- Dodecenylsuccinic anhydride (DDSA): flexibility, dose and the alkenyl family




