Nonenylsuccinic anhydride (NSA, CAS 28928-97-4) is the C13 member of the alkenylsuccinic anhydride family: a branched nonenyl chain of nine carbons on a five-membered anhydride ring, formula C13H20O3, molecular weight 224.30. It is a pale yellow clear liquid with an assay of 99% minimum, supplied as a mixture of branched chain isomers.
NSA is the middle of the family and it is bought for the middle of the property range. Roughly a third of the molecule is anhydride, so the working equivalent weight is 226.6 and the dose at EEW 185 is 110.2 phr – between the short-chain OSA at 103.3 and the long-chain DDSA at 130.9. It softens a network enough to survive thermal cycling and impact, without dropping the glass transition as far as a C16 chain does.
Basic Information
| CAS Number | 28928-97-4 |
| Chemical name | Nonenylsuccinic anhydride (mixture of branched chain isomers) |
| Synonyms | NSA; nonenyl succinic anhydride; 3-nonenyloxolane-2,5-dione (single-isomer reference name) |
| Molecular Formula | C13H20O3 |
| Molecular Weight | 224.30 g/mol |
| Anhydride groups per molecule | 1 |
| Theoretical anhydride group content | About 32.11% (C2O3 = 72.02 of 224.30) |
| Anhydride equivalent weight | 224.30 g/eq theoretical; 226.6 g/eq at 99% assay |
| Theoretical acid value | About 500.3 mg KOH/g |
| Theoretical iodine value | About 113.2 g I2/100 g (one alkenyl double bond) |
| PubChem CID | 5354806 (single-isomer reference structure) |
| InChIKey | FGQUIQAGZLBOGL-CMDGGOBGSA-N |
| Appearance | Pale yellow clear liquid |
| Chemical family | Alkenylsuccinic anhydride (C9 chain, C13 total) |
Specifications
| Item | Value |
|---|---|
| Appearance | Pale yellow clear liquid |
| Assay | 99% min |
| Isomer composition | Mixture of branched chain isomers |
| Colour, free acid, iodine value | Reported per lot; limits agreed against the application |
Where the Branching Comes From
The chain is built from a C9 olefin feedstock rather than from a straight-chain alpha olefin, and the feedstock is itself a mixture – typically a propylene trimer, which is a set of skeletal isomers rather than a single molecule. The product inherits that mixture, so “mixture of branched chain isomers” describes the raw material, not a process choice.
Two consequences follow. The branches keep the product liquid over a wide temperature range, because branched chains do not pack into a lattice; and no single crystallisation point can be quoted for the mixture, which is why the specification is written on appearance, assay and iodine value instead.
Dose and the Family Line
working AEW = 224.30 / 0.99 = 226.6 g/eq, and phr = (AEW / EEW) x 100 x r
| Resin EEW | r = 0.85 | r = 0.90 | r = 1.00 |
|---|---|---|---|
| 185 (standard DGEBA) | 104.1 | 110.2 | 122.4 |
| 200 | 96.3 | 101.9 | 113.3 |
| 250 | 77.0 | 81.6 | 90.6 |
Chain length is the only variable that matters across this family, and the table below is the whole selection logic:
| Anhydride | Chain | Total carbons | Anhydride group | Working AEW | phr at EEW 185, r 0.90 |
|---|---|---|---|---|---|
| Succinic anhydride | None | 4 | 71.97% | 100.6 | 48.9 |
| OSA (42482-06-4) | C8, straight | 12 | 34.25% | 212.4 | 103.3 |
| NSA (28928-97-4) | C9, branched | 13 | 32.11% | 226.6 | 110.2 |
| DDSA (26544-38-7) | C12, branched | 16 | 27.04% | 269.1 | 130.9 |
| DSA, saturated | C12, branched | 16 | 26.83% | 271.1 | 131.9 |
Read it as a dial. Each step to the right buys more flexibility and costs more hardener, at roughly 6 to 19% per step. NSA is the middle setting, and it is usually chosen when a customer has tried DDSA and found it too soft, or tried OSA and found it not soft enough.
Water and Free Acid
Hydrolysis gives nonenylsuccinic acid, C13H22O4 at 242.31:
| Water picked up | NSA destroyed | Nonenylsuccinic acid formed | Free acid increase |
|---|---|---|---|
| 0.05% (0.5 kg/t) | 6.2 kg/t | 6.7 kg/t | +0.67 points |
| 0.10% (1 kg/t) | 12.4 kg/t | 13.4 kg/t | +1.35 points |
Free acid percent as C13H22O4 equals acid value in mg KOH/g multiplied by 0.2159. The damage sits between OSA and DDSA, which is the expected result: the heavier the molecule, the more material one kilogram of water destroys.
Applications
- Flexible epoxy potting and encapsulation. Electronic and electrical assemblies that see thermal cycling, where a rigid anhydride would crack and a C16 chain would soften the part too far.
- Toughened adhesives and sealants. Longer pot life and better peel strength than a ring anhydride, with more stiffness than DDSA.
- Blend component for intermediate flexibility. A 10 to 30% addition to a THPA or MTHPA system moves toughness without taking the glass transition below the service window.
- Surface and filler treatment. Esterification of hydroxyl-bearing fillers to change hydrophobicity and improve dispersion.
- Precursor to succinimide and amide chemistry. The alkenyl chain plus the anhydride ring is the same starting geometry as the rest of the family, used for lubricant and corrosion additive intermediates.
- Alkyd and polyester modification. A liquid acid-functional modifier that brings a branched hydrocarbon side chain into a condensation resin.
Handling and Storage
A liquid in steel drums and IBCs. Store indoors, 5 to 30 deg C, out of sunlight, bung tight, and nitrogen-blank a part-full drum for holds beyond a few weeks. Because the chain is branched, the product has no crystallisation point to worry about – the storage risks are hydrolysis and oxidation of the alkenyl bond, both of which show up as free acid and colour.
Handling: irritant, skin sensitiser, reacts exothermically with amines, alkalis and alcohols, hydrolyses with water. Local exhaust ventilation at the transfer point, gloves and eye protection. Absorb spills and dispose of as chemical waste.
Chemical Structure
CCCCCCC=CCC1CC(=O)OC1=O
The reference structure above is the straight-chain isomer. The commercial product carries methyl branching along the nine-carbon chain, from the propylene trimer feedstock. The anhydride ring and the equivalent weight are the same; only the packing and the melting behaviour differ.
Related Products
- Octenylsuccinic anhydride (OSA), CAS 42482-06-4 – one carbon shorter
- Dodecenylsuccinic anhydride (DDSA), CAS 26544-38-7 – the C12 chain version
- Dodecylsuccinic anhydride (DSA), branched isomers – the saturated C12 analogue
- Alkenylsuccinic anhydride, paper sizing grade (ASA 2024), CAS 70983-53-8
- Succinic anhydride (SA), CAS 108-30-5 – the unsubstituted parent
- Anhydride curing agent dosage: phr, AEW and accelerators
FAQ
What is NSA used for? Mainly as a middle-chain flexibilising anhydride hardener for epoxy – potting, encapsulation and adhesives – and as an alkenyl building block for succinimide and amide chemistry.
Why is it supplied as a mixture of branched isomers? Because the C9 olefin feedstock is a propylene trimer, which is itself a mixture of skeletal isomers. The branching keeps the product liquid and is not adjustable to a single structure.
NSA or DDSA? DDSA (C12 chain, AEW 269.1, 130.9 phr) softens more and costs more hardener weight; NSA (C9 chain, AEW 226.6, 110.2 phr) is the middle choice. If a DDSA system came out too soft or too low in heat resistance, NSA is the usual step back.
Does it have a crystallisation point? Not a meaningful one – branched chains do not pack, so the product stays liquid well below the temperatures where a straight-chain C12 or a ring anhydride would freeze. Specify appearance and iodine value instead.
How is NSA distinguished from DDSA on a certificate? Iodine value and equivalent weight both separate them: 113.2 against 95.3 for iodine value, and AEW 226.6 against 269.1. The iodine value is the cheaper test.
Contact PolyBlueChem for a current certificate of analysis, a sample for a flexibility trial, and a quotation for drum or IBC supply.




