Dodecylsuccinic anhydride (DSA) is the saturated member of the C12 alkenylsuccinic anhydride family: a branched dodecyl chain on the same five-membered anhydride ring, formula C16H28O3, molecular weight 268.39. It is a colourless to pale yellow clear liquid with an assay of 99% minimum and an iodine value of 1 maximum.
Two hydrogens separate it from DDSA, and those two hydrogens are the whole product. DDSA carries an alkenyl double bond; DSA does not. The dose is within 0.7% of DDSA, the equivalent weight within 0.7%, and nothing on a mixing sheet can tell them apart – but the saturated version has no allylic hydrogen to oxidise, so it does not yellow in storage or in service, and the iodine value on the certificate is what proves which one you have.
Basic Information
| CAS Number | Not assigned for the branched isomer mixture. The straight-chain isomer is registered as CAS 2561-85-5 (EINECS 219-880-4) |
| Chemical name | Dodecylsuccinic anhydride; 3-dodecyloxolane-2,5-dione; dodecylbutanedioic anhydride |
| Synonyms | DSA; dodecyl succinic anhydride; n-dodecylsuccinic anhydride (straight chain); 1,2-tetradecanedicarboxylic anhydride; 3-dodecyldihydrofuran-2,5-dione |
| Molecular Formula | C16H28O3 |
| Molecular Weight | 268.39 g/mol |
| Anhydride groups per molecule | 1 |
| Theoretical anhydride group content | About 26.83% (C2O3 = 72.02 of 268.39) |
| Anhydride equivalent weight | 268.39 g/eq theoretical; 271.1 g/eq at 99% assay |
| Theoretical acid value | About 418.1 mg KOH/g |
| Theoretical iodine value | 0 g I2/100 g (fully saturated – this is the identity check) |
| PubChem reference | The straight-chain isomer is CID 98107, InChIKey YAXXOCZAXKLLCV-UHFFFAOYSA-N; a branched mixture has no single structure record |
| Appearance | Colourless to pale yellow clear liquid |
| Chemical family | Alkylsuccinic anhydride (long-chain, saturated C16) |
Specifications
| Item | Value |
|---|---|
| Appearance | Colourless to pale yellow clear liquid |
| Assay | 99% min |
| Iodine value | 1 max |
| Colour, free acid, viscosity | Reported per lot; limits agreed against the application |
The Iodine Value Is the Specification
An iodine value of 1 or below on a C16 chain is not a tight limit on an unsaturated product; it is a statement that the product is saturated. Two things follow, and both matter commercially.
First, it separates DSA from DDSA cleanly, in one measurement, on the receiving dock:
| Property | DSA, saturated | DDSA, alkenyl |
|---|---|---|
| Formula / MW | C16H28O3 / 268.39 | C16H26O3 / 266.38 |
| Theoretical iodine value | 0 | 95.3 |
| Working AEW at 99% | 271.1 | 269.1 |
| phr at EEW 185, r 0.90 | 131.9 | 130.9 |
| Typical appearance | Colourless to pale yellow | Pale yellow to yellow |
| Colour on storage | Stable | Darkens; oxidation of the allylic position |
Second, it explains why the appearance specification here is a band tighter than the DDSA page: colourless to pale yellow against pale yellow to yellow. A saturated molecule has nothing to oxidise at the chain, so the colour that leaves the reactor is roughly the colour that arrives.
Why the Allylic Hydrogen Matters
In DDSA the double bond sits part-way along the chain, which puts allylic hydrogens next to it. Allylic C-H bonds are the weakest in the molecule and the first to be attacked by oxygen; the hydroperoxides that form decompose into carbonyls, and carbonyls are yellow. That is the mechanism behind a DDSA drum darkening in a warm store while its assay and free acid stay within specification.
DSA removes the double bond and with it the allylic position. The result is a hardener that can be held hot for longer, stored for longer and shipped through warmer climates without the colour moving – and, in the cured part, a network with no residual unsaturation to oxidise in service. That is the same reasoning that puts MHHPA ahead of MTHPA in visible castings, and the same reasoning that puts a hydrogenated diol ahead of bisphenol A in exterior coatings.
Dose and Blending
The dose arithmetic is that of DDSA, because the molecular weight is almost the same:
working AEW = 268.39 / 0.99 = 271.1 g/eq, and phr = (AEW / EEW) x 100 x r
| Resin EEW | r = 0.85 | r = 0.90 | r = 1.00 |
|---|---|---|---|
| 185 (standard DGEBA) | 124.6 | 131.9 | 146.6 |
| 200 | 115.2 | 122.0 | 135.6 |
| 250 | 92.2 | 97.6 | 108.5 |
At EEW 185 and r 0.90 that is 131.9 phr, against 74.0 for THPA – 78% more hardener by weight. As with DDSA, the extra weight is the flexibiliser arriving inside the hardener, which is why a long-chain anhydride is specified at all. For intermediate flexibility, blend with a short-chain anhydride; the blend equivalent weight is the harmonic mean, so 30% DSA in THPA gives 175.2 g/eq and a dose of 85.2 phr.
Where the Branched Isomers Come From
The chain in a commercial dodecylsuccinic anhydride is not a straight n-dodecyl group. It is built from a C12 olefin feedstock – typically a propylene tetramer – reacted onto maleic anhydride and then hydrogenated. Propylene tetramer is itself a mixture of skeletal isomers, so the product inherits that mixture, and “mixture of branched chain isomers” is a description of the feedstock rather than a process choice.
Two practical consequences. The branched chains do not pack, so the product stays liquid over a wider temperature range than the straight-chain isomer, which is why it needs no melting. And the mixture has no single CAS number; the registered 2561-85-5 is the straight-chain compound, which is a different substance on a certificate. Buy against the iodine value, the assay and the appearance, and treat the CAS field as informative rather than definitive.
Applications
- Flexible epoxy where colour matters. Potting, encapsulation and coating systems that need the flexibility of a long-chain anhydride without the yellowing of an unsaturated one.
- Long-life and high-reliability castings. No residual unsaturation means no oxidation site in the cured network, which matters where the part is expected to hold colour and dielectric properties for years.
- Blend component with aromatic or cycloaliphatic anhydrides. Used to pull toughness into a rigid system while keeping the colour specification achievable.
- Precursor chemistry where saturation is required. Reactions in which the alkenyl double bond of DDSA would interfere – certain hydrogenations, additions and polymerisations.
- Lubricant and corrosion-inhibitor intermediates built on a saturated C16 succinic backbone, where oxidative stability of the finished additive is the specification.
- Hydrolysis precursor. Ring opening gives dodecylsuccinic acid, the saturated counterpart of the diacid sold as CAS 29658-97-7.
Handling and Storage
A liquid in steel drums and IBCs. Store indoors between 5 and 30 deg C, out of sunlight, bung tight. Because the molecule is saturated, the storage risk is dominated by water rather than by oxidation: the anhydride ring still opens with moisture and the free acid still climbs. Nitrogen-blank a part-full drum, and re-test rather than top up.
Handling: irritant and skin sensitiser, reacts exothermically with amines and alkalis, hydrolyses with water. Local exhaust ventilation at the transfer point, gloves and eye protection. Absorb spills and dispose of as chemical waste; never wash into a drain.
Chemical Structure
CCCCCCCCCCCC1CC(=O)OC1=O
One anhydride ring, two methylenes, one saturated twelve-carbon chain. The branched commercial material has the same ring and the same chain length with methyl branching along it. Compared with DDSA the structure differs only by the absence of one double bond – and that absence is what the iodine value specification is protecting.
Related Products
- Dodecenylsuccinic anhydride (DDSA), CAS 26544-38-7 – the unsaturated analogue
- Nonenylsuccinic anhydride (NSA), CAS 28928-97-4 – the C13 homologue
- Octenylsuccinic anhydride (OSA), CAS 42482-06-4 – the C12 straight-chain homologue
- Dodecenylsuccinic acid (DCSA), CAS 29658-97-7
- MHHPA, CAS 25550-51-0 – the same “saturated for colour” argument in a ring hardener
- Free acid, colour and storage of acid anhydrides
FAQ
Is there a CAS number for this product? Not for the branched mixture. The straight-chain isomer is CAS 2561-85-5 (EINECS 219-880-4, PubChem CID 98107), and that number is sometimes quoted for the whole family, but a branched isomer mixture has no single structure and therefore no single registration. Specify by iodine value, assay and appearance.
Why is the iodine value 1 or below? Because the product is saturated. A C16 chain with one double bond would read about 95; a reading of 1 or less means the hydrogenation is essentially complete. It is the fastest way to confirm that the drum is DSA and not DDSA.
What is the difference from DDSA in practice? Dose and equivalent weight differ by 0.7%, so the mixing sheet barely moves. What changes is colour stability, storage life and the absence of an oxidation site in the cured network.
Is DSA a drop-in replacement for DDSA? For mechanical properties and dose, almost. For colour and long-term stability, DSA is the better of the two. For anything that relies on the double bond – copolymerisation, addition chemistry – DSA will not work at all, because there is no double bond.
Can it be used at room temperature? No. It is an anhydride and the ring still needs heat to open; the long chain makes the network flexible, not the cure fast.
How is it packed? Steel drums and IBCs; ISO tanks for larger volumes. Because the product is a liquid at ambient temperature, no melting or heated transport is required, which is one practical advantage over the solid anhydrides.
Contact PolyBlueChem for a current certificate of analysis with iodine value and free acid, a sample for a flexibility or colour trial, and a quotation for drum or IBC supply.




