Octenylsuccinic Anhydride (OSA), CAS: 42482-06-4

Octenylsuccinic anhydride (OSA, CAS 42482-06-4) is the C12 member of the alkenylsuccinic anhydride family: an octenyl chain of eight carbons on a five-membered anhydride ring, formula C12H18O3, molecular weight 210.27. It is a pale yellow to yellow clear liquid with an assay of 99% minimum, supplied as a mixture of cis and trans isomers around the double bond.

OSA sits at the short end of the family, which sets everything else. The chain is eight carbons long, so the molecule is 34% anhydride group by weight and carries 4.7 equivalents per kilogram – more than DDSA but less than a ring anhydride such as THPA. That makes it the mild flexibiliser of the group: enough hydrocarbon to soften a rigid network and lift adhesion, not enough to turn a casting elastomeric.

Basic Information

CAS Number 42482-06-4
Chemical name 3-(Oct-2-en-1-yl)oxolane-2,5-dione (2-octen-1-ylsuccinic anhydride)
Synonyms OSA; octenylsuccinic anhydride; 2-octen-1-ylsuccinic anhydride; octenyl succinic anhydride; n-octenylsuccinic anhydride (NOSA)
Molecular Formula C12H18O3
Molecular Weight 210.27 g/mol
Anhydride groups per molecule 1
Theoretical anhydride group content About 34.25% (C2O3 = 72.02 of 210.27)
Anhydride equivalent weight 210.27 g/eq theoretical; 212.4 g/eq at 99% assay
Theoretical acid value About 533.7 mg KOH/g
Theoretical iodine value About 120.7 g I2/100 g (one alkenyl double bond)
PubChem CID 534543
InChIKey WSGFXVFLWVXTCJ-UHFFFAOYSA-N
Appearance Pale yellow to yellow clear liquid
Chemical family Alkenylsuccinic anhydride (C8 chain, C12 total)

Specifications

Item Value
Appearance Pale yellow to yellow clear liquid
Assay 99% min
Isomer composition Mixture of cis and trans
Colour, free acid, iodine value Reported per lot; limits agreed against the application

The cis/trans statement is part of the product, not a tolerance. The two geometries come out of the reaction together and they differ slightly in reactivity and in how the chain packs, which is why the melting behaviour of an OSA lot can vary while the assay sits comfortably in specification.

Dose Arithmetic

working AEW = 210.27 / 0.99 = 212.4 g/eq, and phr = (AEW / EEW) x 100 x r

Resin EEW r = 0.85 r = 0.90 r = 1.00
185 (standard DGEBA) 97.6 103.3 114.8
200 90.3 95.6 106.2
250 72.2 76.5 84.9

At EEW 185 and r 0.90 that is 103.3 phr, 40% more than THPA at 74.0 phr. Chain length is what drives the family, and the progression is regular:

Anhydride Chain Total carbons Working AEW phr at EEW 185, r 0.90
Succinic anhydride None 4 100.6 48.9
OSA C8 12 212.4 103.3
NSA (28928-97-4) C9 13 226.6 110.2
DDSA (26544-38-7) C12 16 269.1 130.9

That table is the selection tool for the whole family: pick the chain length that gives the flexibility you need, then read the dose off the AEW. Going one step longer in the table costs roughly 6 to 8% more hardener and buys a further drop in glass transition.

Water and Free Acid

OSA hydrolyses to octenylsuccinic acid (C12H20O4, 228.29), and because the molecule is smaller than DDSA the damage per kilogram of water is smaller too:

Water picked up OSA destroyed Octenylsuccinic acid formed Free acid increase
0.05% (0.5 kg/t) 5.8 kg/t 6.3 kg/t +0.63 points
0.10% (1 kg/t) 11.7 kg/t 12.7 kg/t +1.27 points

Free acid percent as C12H20O4 equals acid value in mg KOH/g multiplied by 0.2034.

The Food-Grade Question

Octenylsuccinic anhydride is the reagent behind OSA-modified starch, the food and industrial starch ester that carries the additive number E1450 in the European list. That is a large, real market and a legitimate reason someone searches for this CAS.

It is not the product on this page. Food-additive use requires a grade qualified against food-contact requirements – the reagent must be made to a specification that includes the residual reagent limits in the finished starch, and the supply chain is audited accordingly. The material offered here is an industrial anhydride at 99% minimum. If a food-contact or E1450 application is intended, state it at the enquiry and expect to qualify a grade separately rather than assume an industrial certificate carries the approval.

Applications

  • Mild flexibiliser for epoxy. The choice when a full DDSA dose would soften the part too much: adhesion and toughness improve while the glass transition stays usable.
  • Starch and polysaccharide esterification. Reagent for octenylsuccinate starches, both the food-contact grades and the industrial emulsion stabilisers used in coatings and adhesives.
  • Surface treatment of fillers and pigments. Esterification of hydroxyl-bearing surfaces to change hydrophobicity and dispersion in a resin.
  • Coatings and adhesive resins. Acid-functional modification of alkyds and polyesters, and adhesion promoters in solvent-borne systems.
  • Sizing and paper chemistry. One of the alkenylsuccinic chain lengths used in reactive sizing; commercial sizing agents are normally specified as such rather than as generic OSA.
  • Intermediate chemistry. The alkenyl double bond plus the anhydride ring is the starting geometry for succinimide, amide and half-ester products.

Handling and Storage

A liquid in steel drums and IBCs. Store indoors, 5 to 30 deg C, out of sunlight, bung tight, and nitrogen-blank a part-full drum. The material is less viscous than the C16 members of the family and will take up water at the surface more readily because of it; both free acid and colour move with moisture and heat.

Handling: irritant, skin sensitiser, reacts exothermically with amines, alkalis and alcohols, hydrolyses with water. Local exhaust ventilation, gloves and eye protection. Absorb spills and dispose of as chemical waste; do not wash into a drain.

Chemical Structure

CCCCCC=CCC1CC(=O)OC1=O

A five-membered anhydride ring with two methylenes and an eight-carbon chain carrying one double bond. The chain can be cis or trans about that bond, which is why the product is supplied as a mixture – the geometry does not change the equivalent weight, only the packing.

Related Products

FAQ

What is the difference between OSA and DDSA? Chain length: OSA carries a C8 chain on the anhydride ring (C12 total, AEW 212.4) and DDSA carries a C12 chain (C16 total, AEW 269.1). OSA is the milder flexibiliser and needs a smaller dose.

Is this the OSA used to make OSA starch? The chemistry is the same; the qualification is not. E1450 food-contact starch requires a reagent grade qualified for that use. The material here is an industrial anhydride, and a food application should be raised at enquiry.

Why is the product sold as a cis/trans mixture? Because the reaction produces both geometries and commercial supply does not separate them. The mixture affects packing and melting behaviour slightly, not the equivalent weight or the cure chemistry.

Can OSA be the only hardener? It can, but a C8 chain does not soften a network as much as users of DDSA expect, and it does not stiffen as much as a ring anhydride. Most formulations use it as a partial replacement rather than the sole hardener.

How does the iodine value help? It confirms the alkenyl double bond is present and gives a rough check on chain length across the family: about 120.7 here, 113.2 for NSA, 95.3 for DDSA, and zero for the saturated dodecyl version.

Contact PolyBlueChem for a current certificate of analysis, a sample for a flexibility trial, and a quotation for drum or IBC supply.

Scroll to Top