What Paraxanthine Is, and Why the Methyl Positions Matter
Paraxanthine is 1,7-dimethylxanthine, CAS 611-59-6, a purine-2,6-dione with the formula C7H8N4O2 and a molecular weight of 180.16 g/mol. It sits in the same family as caffeine, theophylline and theobromine, and the only structural difference between those four molecules is where the methyl groups sit on the xanthine bicycle. That single fact drives almost everything about how the material is bought, tested and specified.
Caffeine carries three methyl groups, at N1, N3 and N7. Remove the N3-methyl group and you get paraxanthine. Remove the N7-methyl group instead and you get theophylline. Remove the N1-methyl group and you get theobromine. In the human body this demethylation is not a thought experiment: cytochrome P450 1A2 removes the N3-methyl group of caffeine, and paraxanthine is the major circulating metabolite, which is why paraxanthine appears in exposure studies and in analytical method development far more often than its commercial availability would suggest.
For a buyer, the practical consequence is that paraxanthine is a specification-driven purchase, not a commodity purchase. Three products share its molecular formula, its molecular weight and its elemental composition, so the usual identity checks in a receiving laboratory do not separate them. What separates them is the InChIKey, the chromatographic retention time against authentic standards, and the NMR spectrum.
Chemical and Physical Properties
| Property | Value |
|---|---|
| CAS Registry Number | 611-59-6 |
| IUPAC name | 1,7-dimethyl-3H-purine-2,6-dione |
| Common synonyms | Paraxanthine; 1,7-dimethylxanthine |
| Molecular formula | C7H8N4O2 |
| Molecular weight | 180.16 g/mol |
| Elemental composition | C 46.67%, H 4.48%, N 31.10%, O 17.76% (calculated) |
| PubChem CID | 4687 |
| InChIKey | QUNWUDVFRNGTCO-UHFFFAOYSA-N |
| SMILES | CN1C=NC2=C1C(=O)N(C(=O)N2)C |
| Appearance | White to off-white crystalline powder |
| Melting point | About 294 deg C with decomposition (reported literature range) |
| Solubility | Sparingly soluble in cold water; more soluble in hot water and in aqueous alkali |
| Acid-base behaviour | Weakly acidic via the N3-H of the xanthine ring; solubility rises as the pH rises |
| Stability | Stable as a dry solid away from light, moisture and strong oxidisers |
The solubility behaviour is worth one paragraph because it explains a common processing problem. Paraxanthine has one acidic proton left on the ring, at N3, because N1 and N7 are methylated. In neutral water it is only sparingly soluble, which is why purification and formulation work usually go through aqueous alkali or through a polar aprotic solvent rather than through plain water. It also means that a simple pH shift can move the material from solution to solid, which is convenient for recrystallisation and inconvenient if a downstream aqueous step is accidentally alkaline.
Four Methylxanthines, One Formula Family
The table below is the single most useful reference when a certificate of analysis, a certificate of origin or a purchase requisition has to be checked. Three of the four rows are isomeric and therefore indistinguishable by formula, weight or elemental analysis.
| Compound | Methyl positions | Molecular formula | MW (g/mol) | InChIKey | PubChem CID |
|---|---|---|---|---|---|
| Paraxanthine | 1,7- | C7H8N4O2 | 180.16 | QUNWUDVFRNGTCO-UHFFFAOYSA-N | 4687 |
| Theophylline | 1,3- | C7H8N4O2 | 180.16 | ZFXYFBGIUFBOJW-UHFFFAOYSA-N | 2153 |
| Theobromine | 3,7- | C7H8N4O2 | 180.16 | YAPQBXQYLJRXSA-UHFFFAOYSA-N | 5429 |
| Caffeine | 1,3,7- | C8H10N4O2 | 194.19 | RYYVLZVUVIJVGH-UHFFFAOYSA-N | 2519 |
Read the table in two directions. Caffeine is the easy case: one extra CH2, a 14.03 g/mol difference and a melting point well below the other three, so a formula or a melting-point check catches a caffeine mix-up quickly. The three dimethylxanthines are the hard case: identical formula, identical weight, identical nitrogen content at 31.10%, and reported melting ranges that overlap. A laboratory that authenticates paraxanthine against theophylline by melting point alone is not authenticating anything.
How Paraxanthine Is Made
Two synthetic families dominate, and each one leaves its own impurity signature, which is why the manufacturing route is a legitimate question to ask a supplier.
Route 1: selective methylation of theophylline at N7
Starting from 1,3-dimethylxanthine, the target is to put the third methyl group on the imidazole nitrogen at N7 rather than on the imide nitrogen at N3 or the ring nitrogen at N9. Theophylline has two ionisable ring nitrogens and both are candidates, so the reaction is a regioselectivity problem rather than a conversion problem. Methylating agents are the usual ones: methyl iodide, dimethyl sulfate or dimethyl carbonate as the greener alternative, run in a polar aprotic solvent over a base, or under phase-transfer conditions with a solid carbonate. Temperature control matters twice over, because over-methylation gives caffeine and the wrong-site product gives 1,3- or 3,7-isomers that are extremely hard to remove by crystallisation.
Route 2: selective N3-demethylation of caffeine
Going the other way, the methyl group that has to come off caffeine is the N3 one, leaving both N1 and N7 methylated. Chemical demethylation is not naturally selective for N3; strong nucleophiles and harsh conditions tend to produce mixtures of paraxanthine, theobromine and theophylline. This route is therefore more typical of biocatalytic work, using engineered cytochrome P450 or N-demethylase enzymes, and of the literature that studies caffeine metabolism as a production route rather than only as a pharmacokinetic event.
Route 3: de novo purine construction
Building the purine ring around a pre-methylated urea or uracil fragment avoids the selectivity problem altogether, because the methyl groups enter with the starting materials rather than being added to a finished ring. It is the classic approach for xanthine chemistry and it gives a very clean positional outcome, at the cost of a longer linear sequence and the need to handle ring-closure by-products.
Whichever route is used, the specification consequence is the same: the two specified impurities are positional or over-methylated xanthines, and the certificate should name them. A specification that says only "Impurity 1 not more than 1.0%" leaves the buyer unable to tell whether the lot contains a harmless residual starting material or a pharmacologically different isomer.
Specification: What a Paraxanthine Certificate Should Contain
A paraxanthine lot sold at >99% HPLC purity typically carries the following envelope. The exact numbers are grade-dependent, but the structure of the specification should not be negotiable.
| Group | Typical requirement | Why it is there |
|---|---|---|
| Identity | IR or NMR consistent with reference; retention time match on HPLC | Formula and weight cannot distinguish the three isomers |
| Assay | >99.0% by HPLC, area normalisation | Core purity figure; must be read together with the impurity limits |
| Specified impurities | Impurity 1 <=1.0%, Impurity 2 <=0.5% | Usually caffeine and a positional isomer; identities must be named |
| Water / volatiles | Water <0.5%, loss on drying <=0.5% | Two figures on the same batch expose residual solvents |
| Inorganics | Residue on ignition <=0.1%, heavy metals <20 ppm | Catalyst and salt residues from work-up |
| Elemental metals | Pb <1.0, As <1.5, Cd <0.5, Hg <1.0 ppm | Four specified metals inside a 20 ppm total budget |
| Microbiology | TPC <1000 cfu/g, yeast and mould <100 cfu/g, E. coli, Salmonella and S. aureus negative in 10 g | Needed only if the buyer intends a food-adjacent route |
Four reading rules that decide acceptance
Rule 1: the limits must be internally consistent. If the assay is above 99.0% by area normalisation, the sum of all impurity peaks must be below 1.0%. A certificate that allows 1.0% for one impurity and 0.5% for another is describing two separate worst cases, not a lot. Ask for the total impurity figure and for the individual peak table.
Rule 2: loss on drying minus water is a hidden solvent figure. A lot with 0.45% water and 0.50% loss on drying is carrying about 0.05% of something else. That difference, multiplied across a tonne, is the residue from the final crystallisation solvent and it is worth asking about before it becomes a customer complaint.
Rule 3: the total heavy-metal limit is a budget with 16 ppm left over. The four named metals account for 4.0 ppm of the 20 ppm allowance. The remaining headroom belongs to iron and other unspecified metals, which is exactly where a recrystallisation in a stainless or glass-lined reactor can hide.
Rule 4: nitrogen content proves nothing about purity here. Since paraxanthine, theophylline and theobromine are all 31.10% nitrogen, a Kjeldahl or elemental nitrogen result cannot confirm that a lot is paraxanthine rather than one of its isomers, and it cannot detect a 5% isomer contamination at all. It is a useful purity check for a nitrate or an ammonium salt; it is the wrong tool for a methylxanthine.
Analytical Methods in Practice
Reversed-phase HPLC with UV detection at the xanthine absorption maximum is the workhorse method: a C18 column, water or buffer with a small amount of acetonitrile or methanol, and authentic standards for all four xanthines. The four compounds elute in a characteristic order that depends on the mobile phase, which is precisely why the standard mix has to be injected with every run rather than borrowed from a published table.
For identity, proton NMR is decisive. The two N-methyl singlets of paraxanthine appear as two separate three-proton signals, and their chemical shifts and the aromatic CH pattern differ from those of the 1,3- and 3,7-isomers, which is the cheapest way to prove which isomer is in the bottle. Mass spectrometry confirms the molecular weight but cannot distinguish the isomers, because they fragment from the same formula.
Water is measured by Karl Fischer titration and loss on drying by oven or thermogravimetry. Running both on the same batch, and writing both into the specification, is the only way a buyer can see the solvent residue that a single moisture figure would hide.
Applications
Paraxanthine is sold into four quite different markets, and the grade that suits one is not automatically suitable for another.
- Reference standard and analytical calibrant. Purchased in small quantities at the highest purity available, with a certificate that names the impurities. The buyer is a laboratory, the decision criterion is documentation, and the pack sizes are grams.
- Medicinal chemistry and xanthine library work. Used as a scaffold for N-alkylation, N-arylation and C8 substitution, and as a comparator when a series of 8-substituted xanthines is being profiled. Here the requirement is kilogram-scale availability with a reproducible impurity profile rather than a pharmacopoeial monograph.
- Metabolite standard for caffeine research. Because paraxanthine is the major CYP1A2 metabolite of caffeine, it is the quantified analyte in ADME, biomarker and exposure studies. Isotopically labelled material is a separate sourcing question and is not interchangeable with the unlabelled grade.
- Nutritional-ingredient raw material. Traded in markets where a purine alkaloid ingredient has an established regulatory route. This is a buyer-side responsibility: the regulatory status of paraxanthine differs between jurisdictions, some treat it as a novel ingredient, and none of that can be resolved by a supplier certificate. We do not make health claims and we do not warrant that a lot is registrable in a market we have not verified.
Buying Checklist
Six questions separate a professional supplier from a catalogue entry.
- Which isomer, verified how? Ask for the InChIKey and for a chromatogram against authentic paraxanthine, theophylline and theobromine standards, not just a purity percentage.
- What are Impurity 1 and Impurity 2? A named impurity can be assessed; an unnamed one cannot.
- What is the total impurity figure? It has to be consistent with the assay, and it is the number that matters when a specification is written into a contract.
- How is the material dried and from which solvent? This explains loss on drying, residual solvent risk and the physical form of the powder.
- What is the heavy-metal method? A colourimetric sulphide test and an ICP-MS panel are not the same measurement, and the difference shows up at the ppm level.
- What regulatory route does the supplier assume? If the answer is "any use", the supplier has not thought about it. The honest answer names the intended market and the documents that support it.
Handling, Storage and Packaging
Store in a tightly closed container, protected from light and moisture, at ambient temperature in a dry, well-ventilated area, away from strong oxidisers and strong acids. Weighing should be done with local exhaust ventilation, gloves, eye protection and a dust mask, because fine purine powders are light and easily airborne. The specification limits for water and loss on drying are also handling instructions in disguise: the powder is hygroscopic enough that open handling in humid air will move both figures.
Standard packaging is 1 kg and 5 kg in double-bagged fibre drums for reference and development work, and 25 kg fibre drums for pilot and commercial quantities. Each batch is shipped with a certificate of analysis covering identity, assay, impurity profile, water, loss on drying, residue on ignition, heavy metals and microbiological data, plus a safety data sheet. Paraxanthine is not classified as a dangerous good for transport.
Safety and Regulatory Notes
Paraxanthine is a purine alkaloid and, like the rest of the family, it is pharmacologically active. It is not a controlled substance in the major jurisdictions, and it is not a scheduled doping agent, but that does not make it a food ingredient by default. Handle it as an industrial and laboratory chemical: use engineering controls, avoid inhalation of dust, and follow the safety data sheet for personal protective equipment, spill handling and disposal.
Two regulatory points deserve attention before a purchase order. First, the intended use defines which documents are required: a reference standard needs a certificate of analysis and a safety data sheet, a nutritional ingredient needs the destination market’s registration route, and a pharmaceutical intermediate needs the customer’s own regulatory dossier. Second, an ingredient that is legally a food supplement in one country can be a novel food or a prescription-only substance in another, so the origin and the destination both matter.
FAQ
Is paraxanthine a natural product or a synthetic chemical?
Both descriptions exist commercially. Paraxanthine occurs in the human body as the principal metabolite of caffeine and in trace amounts in a few plants, but the material sold in kilograms is synthetic, made either by selective methylation of theophylline or by selective demethylation of caffeine, with biocatalytic variants of both routes under development.
Can I substitute paraxanthine for caffeine on a molar basis?
No. They differ in molecular weight (180.16 versus 194.19 g/mol) and in their number of methyl groups, so a molar substitution changes the mass required by about 7.8% before any other consideration. If a formulation is being converted from one to the other, the calculation has to start from the molar quantity, not the mass on the batch record.
Why does my certificate show a melting point that matches theobromine?
Because the reported melting ranges of the dimethylxanthines overlap. That is exactly why melting point is a screening test and not an identity test for this family. Ask for the InChIKey, an NMR spectrum or a chromatogram against authenticated standards.
What purity should I specify for a reference standard?
Higher than for a production intermediate, and with the impurities named rather than limited. Reference work usually specifies assay above 99.5% with the identity of each specified impurity, a quantitative NMR or mass-balance assay, and a water figure that is measured rather than assumed.
Is paraxanthine available in labelled form?
Isotopically labelled paraxanthine is a specialist product and is normally sourced from dedicated reference-standard suppliers. We supply the unlabelled material described on this page and we do not present an unlabelled lot as a labelled standard.
References and Further Reading
- PubChem Compound records: paraxanthine CID 4687, theophylline CID 2153, theobromine CID 5429, caffeine CID 2519 – identities, formulas and InChIKeys used in the comparison table.
- United States Pharmacopeia general chapters on microbiological examination and loss on drying – the method families referenced in the specification table.
- Product data page: Paraxanthine, CAS 611-59-6, with the current certificate of analysis envelope.
- Related reading on this site: caffeine, theophylline and theobromine product pages.
Disclaimer: this article describes commercial specifications and analytical practice for paraxanthine as an industrial and research chemical. It is not medical or nutritional advice, it makes no health claim for any ingredient, and regulatory status must be confirmed by the buyer for the destination market.
Contact PolyblueChem for a current certificate of analysis, a sample of paraxanthine, and a quotation against your specification.