4-Methylhexahydrophthalic Anhydride (4-MHHPA), CAS: 19438-60-9

4-Methylhexahydrophthalic anhydride (4-MHHPA, CAS 19438-60-9) is the single-isomer form of the hydrogenated methyl anhydride: a colourless liquid, formula C9H12O3, molecular weight 168.19, crystallisation point -15 deg C or below, and no ring double bond at all.

It does the same job as MHHPA and it is bought for one reason – consistency. Where MHHPA (CAS 25550-51-0) is an isomer mixture whose crystallisation, viscosity and reactivity are averages across the distribution, 4-MHHPA is one molecule. Optical and electronic customers who have qualified a cure schedule against a particular reactivity are the ones who pay for that.

Basic Information

CAS Number 19438-60-9
Chemical name 4-Methylhexahydrophthalic anhydride; 5-methyl-3a,4,5,6,7,7a-hexahydro-2-benzofuran-1,3-dione
Synonyms 4-MHHPA; 4-methylhexahydrophthalic anhydride; methylhexahydrophthalic anhydride, single isomer
Molecular Formula C9H12O3
Molecular Weight 168.19 g/mol
Anhydride groups per molecule 1
Anhydride equivalent weight 168.19 g/eq theoretical; about 169.9 g/eq at 99% assay
PubChem CID 86876
InChIKey FKBMTBAXDISZGN-UHFFFAOYSA-N
Appearance Colourless clear liquid
Viscosity at 25 deg C 50 to 70 mPa.s
Crystallisation point -15 deg C max
Ring double bond None
Chemical family Cycloaliphatic dicarboxylic anhydride, liquid, saturated, single isomer

Single Isomer Versus Isomer Mixture

The two products sit side by side in the same catalogue and are routinely confused:

MHHPA, CAS 25550-51-0 4-MHHPA, CAS 19438-60-9
Composition Isomer mixture, methyl position unspecified Single isomer
Formula / MW C9H12O3 / 168.19 C9H12O3 / 168.19
InChIKey VYKXQOYUCMREIS-UHFFFAOYSA-N FKBMTBAXDISZGN-UHFFFAOYSA-N
Batch-to-batch behaviour Varies with the isomer ratio Fixed by the molecule
Typical buyer General casting, potting, coatings Optical, optoelectronic, qualified formulations

Because both are C9H12O3 at 168.19, no assay, no elemental analysis and no equivalent weight can separate them. The InChIKey separates the two records, and the chromatographic isomer distribution separates the lots – which is exactly the same problem as THPA versus 3,4,5,6-THPA in the solid family, and MTHPA versus its single-isomer reference.

Specifications

Three grades, differing in colour, assay and free acid:

Item Grade 1 Grade 2 Grade 3 (custom)
Appearance Colourless clear liquid Colourless clear liquid Colourless clear liquid
Colour, Pt-Co (Hazen) On request 20 max 10 max
Assay On request 99% min On request
Iodine value, g I2/100 g On request 1.0 max On request
Viscosity at 25 deg C, mPa.s On request 50 to 70 On request
Crystallisation point -15 deg C max -15 deg C max -15 deg C max
Free acid 0.2 or 0.5% max On request 0.1 or 0.2% max

Grade 1 is the hydrolysis-controlled grade – the free acid limit and the crystallisation point are the specification, and the colour and assay follow the plant’s standard. Grade 2 is the full sheet, including the iodine value that proves the hydrogenation. Grade 3 is the optical grade: Pt-Co 10 with free acid down to 0.1%.

Equivalent Weight and Dose

phr = (AEW / EEW) x 100 x r. At 99% assay the working equivalent weight is 168.19 / 0.99 = 169.9:

Resin EEW r = 0.85 r = 0.90 r = 1.00
185 (standard DGEBA) 78.1 phr 82.7 phr 91.8 phr
200 72.2 phr 76.5 phr 85.0 phr
250 57.8 phr 61.2 phr 68.0 phr

The figure is within 1% of what a 98% MHHPA grade needs (83.5 phr at EEW 185, r = 0.90 against 82.7 here), so switching between the mixture and the single isomer is not a dosing problem. It is a consistency and paperwork decision.

Applications

  • Optical and optoelectronic encapsulation. Where the formulation was qualified against one reactivity and has to stay there. Pt-Co 10 with free acid at 0.1% is the grade that carries the qualification.
  • LED and lens potting. Colourless, saturated, and with a crystallisation point that survives winter transport.
  • Electrical casting with tight colour control. Instrument transformers and sensors where a colour drift is a customer complaint.
  • Consistency-critical compounding. Any line that has to re-qualify when the isomer distribution shifts – the single isomer removes that variable.
  • Reference material. Used as the identified standard when an incoming MHHPA lot has to be checked for isomer distribution.

Handling and Storage

Liquid in drums, no melting required, and the same moisture discipline as every anhydride: closed drums, dry store, nitrogen blanket after partial use where free acid is specified at 0.2% or below. The -15 deg C crystallisation point means an unheated store is workable in most climates, but a drum that has been cold must be melted completely and homogenised before sampling.

Segregate from amines, alkalis, alcohols and water; handle with gloves and eye protection. The material is a skin sensitiser and the hydrolysis product is corrosive.

Packaging and Supply

Supplied in lined steel drums, with IBC and bulk options on request. Certificates cover appearance, colour, assay, iodine value, viscosity, crystallisation point and free acid according to the grade ordered. A safety data sheet accompanies the first shipment.

Chemical Structure

A cyclohexane ring with one methyl group at a fixed position and a fused five-membered anhydride ring; no double bond in the ring, and no isomer distribution to average over.

Related Products

FAQ

Is 4-MHHPA the same as MHHPA? No. Both are C9H12O3 at 168.19, but 4-MHHPA (19438-60-9) is a single isomer and MHHPA (25550-51-0) is an isomer mixture with the methyl position unspecified. They have different InChIKeys and, in practice, different batch-to-batch behaviour.

Does the single isomer cure differently? The chemistry is the same and the dose is within 1%. What changes is consistency: the mixture’s crystallisation, viscosity and reactivity are averages that move with the isomer ratio, and a qualified process has to be re-checked when they move.

Why is grade 1 specified only on free acid and crystallisation point? Because that is the pair of numbers that describes hydrolysis and handling on a routine shipment. Colour and assay can be added to the specification at no cost if the application needs them – the plant measures both.

Can 4-MHHPA replace MTHPA in an existing formulation? Yes, with a dose correction: at EEW 185 and r = 0.90 the requirement moves from 85.4 phr for a 41.0% MTHPA to 82.7 phr here. The bigger change is in colour stability, which is what the hydrogenation buys.

Contact PolyblueChem for a current certificate of analysis, a sample of any grade, and a quotation for drum, IBC or bulk supply.

Scroll to Top