MHHPA (Methylhexahydrophthalic Anhydride): Iodine Value and Grades

What MHHPA Is, and Why Hydrogenation Is the Whole Product

Methylhexahydrophthalic anhydride (MHHPA, CAS 25550-51-0) is a cycloaliphatic dicarboxylic anhydride with the formula C9H12O3 and a molecular weight of 168.19 g/mol. It is a colourless liquid, it is fully saturated, and its crystallisation point is -15 deg C or below.

Chemically it is MTHPA with its ring double bond removed. That is the entire structural difference, and it is worth stating plainly because it explains the whole commercial position of the product: MHHPA exists so that an anhydride-cured epoxy part does not turn yellow. The double bond left in MTHPA reacts with oxygen and heat over the life of a part; take it away and the colour stops drifting. The cost of taking it away is one hydrogenation step, which is why MHHPA costs a little more than MTHPA and not a lot more.

The trade is not free in the other direction either. The unsaturated ring contributes to the glass transition, so a fully hydrogenated system is usually a little softer at temperature than the tetrahydro version. For optical and outdoor parts that is the right trade; for a hidden casting that runs hot, MTHPA remains the sensible buy, and the comparison is worked through in MTHPA vs MHHPA.

Chemical and Physical Properties

Property Value
CAS number 25550-51-0
CAS registry name Hexahydromethylphthalic anhydride (methyl position unspecified)
EINECS 256-356-4
Molecular formula C9H12O3
Molecular weight 168.19 g/mol
Anhydride groups per molecule 1
Anhydride equivalent weight 168.19 theoretical; 171.6 at 98% assay; 169.9 at 99%
Ring double bond None
Theoretical iodine value 0 (fully saturated); every 1% of MTHPA residue adds 1.53
Appearance Colourless clear liquid
Viscosity at 25 deg C 50 to 70 mPa.s; 60 to 80 mPa.s when blended with HHPA
Crystallisation point -15 deg C max for the pure grades
Single-isomer analogue 4-MHHPA, CAS 19438-60-9, same formula and molecular weight

How It Is Made, and Where the Iodine Value Comes From

MHHPA is made by hydrogenating MTHPA. The tetrahydro product comes from the Diels-Alder addition of isoprene to maleic anhydride and carries one ring double bond; hydrogenation saturates that bond and leaves everything else alone. The hydrogenation is a catalytic step and it never goes to completion, so every commercial lot contains a small amount of tetrahydro material – and that residue is exactly what the iodine value measures.

Two consequences follow. First, the iodine value is not a purity figure in the abstract: it is a direct measurement of how much of the unsaturated, yellowing component is left. Second, the CAS number cannot describe the product on its own, because 25550-51-0 is registered without a specified methyl position and therefore covers an isomer mixture. This is the same lesson as MTHPA: the number defines a family, the specification defines the drum.

Reading the Specification

The iodine value, converted

The theoretical iodine value of a molecule with one double bond is 253.81 / MW x 100. For MTHPA at 166.17 that is 152.75 g I2/100 g; for any fully saturated MHHPA it is zero. So a residue of x per cent of MTHPA raises the iodine value by 1.53x:

Iodine value limit MTHPA equivalent residue What it means in service
1.0 max 0.65% Essentially saturated; colour holds through heat and UV
10 max 6.5% Visible yellowing in a light-coloured part after ageing

The gap between the two grades is ten-fold in chemistry and very small in price, which is why the choice is nearly always decided by the application rather than by the quotation: if the part is visible, 1.0 is the specification; if it is buried in a housing, 10 works.

Equivalent weight against assay

A 98% assay grade has a working equivalent weight of 168.19 / 0.98 = 171.6, not 168.19. At 99% it is 169.9. That is a 1% difference on the dose, which matters less than the habit: take the AEW from the certificate, not from the data sheet, and the same reflex fixes the bigger error waiting in the MTHPA family, where the theoretical figure is 5% away from the working one.

Colour and free acid

Colour in a liquid anhydride is quoted in Pt-Co (Hazen), and for MHHPA it is the visible half of the same story the iodine value tells invisibly: Pt-Co describes the drum today, iodine value describes the cured part in two years. Free acid records hydrolysis, and for the optical grades the limit drops to 0.1 or 0.2%, which is a moisture budget rather than a handling preference – about 0.1 kg of water per tonne at the 0.1% level. The full arithmetic is in free acid, colour, iron and moisture in acid anhydrides.

The Three Product Lines

MHHPA is sold in three forms that share a formula and are not the same product. Sorting them out is the main commercial skill in this family.

1. The isomer mixture, 25550-51-0

The volume product. The methyl position is unspecified, so the crystallisation, viscosity and reactivity are averages across the isomer distribution, and they move a little from lot to lot. Three grades are usual: Pt-Co 20 with iodine value 1.0, Pt-Co 30 with iodine value 10, and a custom grade at Pt-Co 10 with 99% active content. Product data is on the MHHPA product page.

2. The single isomer, 19438-60-9

4-Methylhexahydrophthalic anhydride. Same formula, same molecular weight, different InChIKey, and one reactivity instead of an average. It is bought where a process has been qualified and cannot absorb a moving isomer ratio – optical encapsulation being the usual case. It costs more, and the premium is for consistency rather than for a property. Details are on the 4-MHHPA product page.

3. Blends with HHPA

The third line is a formulation service: MHHPA or 4-MHHPA blended with hexahydrophthalic anhydride (HHPA, 85-42-7) at an agreed ratio, 7:3 being a common starting point. Both components are saturated, so the iodine value of the blend stays at 1.0 or below and the blend is still colour-stable. What changes is arithmetic and logistics:

  • Equivalent weight falls. At 70:30 by weight the blended AEW is 100 / (70/168.19 + 30/154.16) = 163.7, against 168.19 for pure MHHPA – 2.7% less anhydride per hundred parts of resin, and HHPA is the cheaper component.
  • The crystallisation point goes. HHPA crystallises between 34 and 38 deg C. Taking 30% of the MHHPA out and putting HHPA in removes the -15 deg C property that the pure grades were bought for, so a blended lot has to be stored and shipped warm.
  • Viscosity goes up, not down. The blended grades read 60 to 80 mPa.s against 50 to 70 for the pure ones, because the mixture sits closer to its crystallisation range.

That is why a blended specification normally quotes colour, iodine value and viscosity and stops there: the crystallisation point is a property of the ratio, not of the product, and it has to be agreed per order. A customer who orders a 7:3 blend and then stores it in an unheated warehouse in winter has bought a solid.

Anhydride Curing and the Dose

phr = (AEW / EEW) x 100 x r, with r between 0.85 and 1.00 for casting systems. The mechanics are in anhydride curing agent dosage; what matters here is the comparison at EEW 185 and r = 0.90:

Anhydride Working AEW phr Note
THPA (solid) 152.15 74.0 Solid flake, needs a melt stage
MTHPA, 41.0% anhydride group min 175.7 85.4 Unsaturated, can yellow
MHHPA, 98% assay 171.6 83.5 Saturated, colour stable
MHHPA, 99% assay 169.9 82.7 Optical grade
MHHPA / HHPA 7:3 163.7 79.6 Cheaper, but no cold storage credit

The step from MTHPA to MHHPA is 2.2% and is easily absorbed; the step from a solid THPA to any of the liquids is 13 to 15% and is the error that actually happens. The other number worth carrying in the head is 1%: pick the wrong assay and the dose moves by about 1%, which is inside most tolerances – pick the wrong product family and it moves by 13%.

Accelerators and cure profile

Anhydride cure needs heat and, in practice, an accelerator – tertiary amines, substituted imidazoles or quaternary ammonium salts. Casting systems typically cure between 120 and 160 deg C with a post-cure. The reaction is not strongly exothermic, which is why thick sections are cured on anhydrides rather than on amines; MHHPA keeps that advantage and adds colour stability to it.

Applications

  • LED and optoelectronic encapsulation. The defining use of the iodine value 1.0 grade. The cured part is in the light path, and colour drift is a yield problem rather than an aesthetic one. Application detail is in electronic and optoelectronic grade anhydrides.
  • Electrical casting and potting. Dry-type transformers, instrument transformers, bushings, sensors and power modules – the same equipment that uses MTHPA, specified on MHHPA where colour stability is required.
  • Outdoor and light-stable epoxies. Coatings, potting compounds and composites that see daylight. The absence of a reactive double bond is the whole point.
  • Laminates and prepregs. Low viscosity, long pot life and no side reactions from a residual double bond during cure.
  • Optical adhesives and optical potting. Where transmission has to survive the product life and the cured index matters to the design.

Storage, Handling and the Cold Chain

MHHPA is a liquid and needs no melting, which removes the melt-tank failure modes of the solid grades. It does not remove moisture sensitivity: the liquid exchanges its headspace with the plant air every time a drum is opened, and a drum specified at 0.2% free acid will not test at 0.2% after a year of weekly openings unless it is blanketed.

The cold chain is where the blends fail. The pure grades are specified at -15 deg C and survive an unheated store in most of Europe and northern China. A blend containing 30% HHPA will not: HHPA crystallises between 34 and 38 deg C, so the blended material can set in an unheated store, in a winter truck, or in an unheated day tank. Crystallisation is reversible – melt it completely and homogenise before sampling – but every re-melt is heat history, and heat history moves colour in the direction the product was bought to avoid.

Segregate from amines, alkalis, alcohols and water. Gloves and eye protection are the minimum; the anhydride is a skin sensitiser and the hydrolysis product is corrosive.

Buying Checklist

  • Which of the three lines. Isomer mixture 25550-51-0, single isomer 19438-60-9, or an HHPA blend at an agreed ratio? The CAS on the order should match the line, not the family.
  • Iodine value limit. 1.0 for anything visible or exposed; 10 only where colour is not a specification.
  • Assay and the AEW that follows. 98% means 171.6, 99% means 169.9. Ask which figure the supplier’s dose recommendation uses.
  • Colour in Pt-Co, not “colourless”. A number, plus the container lining that protects it.
  • Crystallisation point, and who owns the cold chain. For a blend, this is a per-order agreement rather than a catalogue value.
  • Isomer ratio for the mixture line. Declared rather than certified, and the variable behind the crystallisation and viscosity figures.
  • Free acid limit in kg of water per tonne. 0.2% means about 0.2 kg; if the process needs 0.1%, the nitrogen blanket and the drum size are part of the purchase.

FAQ

Is MHHPA the same as MTHPA?

No. MTHPA (11070-44-3) keeps one ring double bond and is made from isoprene and maleic anhydride; MHHPA (25550-51-0) is that molecule after hydrogenation and has no double bond. They differ by 2.02 in molecular weight and by about 2% in dose, and by much more than that in colour stability.

Why do certificates show both 25550-51-0 and 11070-44-3?

Because 25550-51-0 is the product and 11070-44-3 is the tetrahydro residue left by incomplete hydrogenation. The iodine value is the limit on that residue: 1.0 corresponds to about 0.65% and 10 to about 6.5%.

What is the difference between MHHPA and 4-MHHPA?

4-MHHPA (19438-60-9) is a single isomer; MHHPA is a mixture with the methyl position unspecified. Same formula C9H12O3, same molecular weight 168.19, different InChIKey, different consistency from lot to lot.

Does an HHPA blend still meet iodine value 1.0?

Yes, because both components are saturated. The blend gives up the crystallisation point and gains viscosity, so the specification has to be written around what the customer actually needs.

Can MHHPA be used in a room-temperature-cured system?

Not in production. Anhydride cure needs heat, typically 120 to 160 deg C with an accelerator and a post-cure, whichever member of the family is used.

References and Further Reading

Contact PolyblueChem for a current certificate of analysis, a sample of the mixture, the single isomer or an agreed blend, and technical data on iodine value and ion content.

Scroll to Top