Hydrogenated Methyl Nadic Anhydride (H-MNA, CAS 39973-36-9) is methyl nadic anhydride with its residual double bond saturated. It is the choice when a casting or a laminate must stay colour-stable: MNA carries an unsaturated ring that slowly oxidises and yellows, and hydrogenating it removes that site without changing the handling – the molecule is still a low-viscosity liquid anhydride with an equivalent weight around 180.
One thing to settle at enquiry stage: the same CAS number is supplied in two physical forms, a colourless transparent liquid and a white solid. They are not interchangeable in a process even though the certificate reads the same CAS. Which form you receive depends on the isomer distribution and the crystallisation history of the lot, and the purchase order should say which one the plant can handle.
Status: Specifications below are the current production grade in both forms. Isomer ratio, crystallisation behaviour and colour grade are confirmed per lot; ask for a COA and a small sample of the form you intend to run.
Basic Information
| CAS Number | 39973-36-9 |
| Chemical name | Hydrogenated methyl nadic anhydride; 2-methyl-4-oxatricyclo[5.2.1.0(2,6)]decane-3,5-dione; methyl hexahydro-3,6-methanophthalic anhydride |
| Molecular Formula | C10H12O3 |
| Molecular Weight | 180.20 g/mol |
| PubChem CID | 4231775 |
| InChIKey | KURYGOWCQOQZRG-UHFFFAOYSA-N |
| Chemical Family | Bridged alicyclic anhydride (saturated) |
| Anhydride equivalent weight | 180.20 g/eq (183.9 g/eq at 98% assay) |
| Iodine value (theoretical) | 0 – no carbon-carbon double bond remains |
Specification
| Item | Liquid form | Solid form |
| Appearance | Colourless transparent liquid | White solid |
| Purity | 98% min | 98% min |
| CAS | 39973-36-9 | 39973-36-9 |
| Anhydride equivalent weight | 180.20 g/eq theoretical | 180.20 g/eq theoretical |
| Iodine value | Effectively 0 | Effectively 0 |
| Handling implication | Metered or pumped; no melting step | Requires melting and a heated line |
One CAS, two forms
The bridged anhydrides are isomer mixtures, and the methyl group can sit in more than one position on the norbornane skeleton. Different isomer ratios crystallise differently: a lot rich in the low-melting isomers stays liquid at ambient, a lot richer in the high-melting isomer sets to a white solid. Both are “H-MNA, CAS 39973-36-9, 98% min” on paper.
For the plant this decides the whole dosing arrangement:
- Liquid form – pumped from a drum or IBC, metered by mass, no heating. Simplest for room-temperature impregnation and for small batches.
- Solid form – melted in a jacketed vessel and kept above its melting point until use. Cleaner chemistry in one sense (no crystallisation during storage, since it has already crystallised), but it needs a heated line and a melt tank, and repeated melting cycles darken the product.
- Ask which form at quotation stage, and write the requirement into the PO. Two suppliers quoting “H-MNA liquid” and “H-MNA solid” are quoting different handling.
This is the same trap that runs through the whole anhydride family – MHHPA is sold against more than one CAS, DSA is sold under the DDSA number, and H-MNA appears in two forms under one number. In every case the certificate alone does not tell you what will arrive at the gate.
Why hydrogenate at all
MNA (CAS 25134-21-8, C10H10O3, 178.18) contains one carbon-carbon double bond inside the bridged ring. It is useful – it raises the crosslink density and the heat deflection temperature – but it is also the site where UV and oxygen attack first, and the visible result is yellowing of a casting that was water-white when it was poured. Hydrogenating the double bond changes three things at once:
- Colour stability. No unsaturation means no allylic oxidation pathway, so a saturated casting holds its colour in service and under light.
- Iodine value. The theoretical iodine value of MNA is 142.4 (253.81 / 178.18 x 100); for H-MNA it is zero. This is the one-line analytical check that tells you whether the hydrogenation actually happened – and, unlike colour, it cannot be faked by adding a stabiliser.
- Equivalent weight. 178.18 becomes 180.20, a 1.1% move – small enough that an existing formulation can be carried over with a check rather than a re-validation.
Comparison: H-MNA against the other bridged and liquid hardeners
| Hardener | CAS | Formula / MW | AEW | Iodine value | State | Where it fits |
| H-MNA | 39973-36-9 | C10H12O3 / 180.20 | 180.20 | 0 | Liquid or solid | Colour-stable castings, light-stable systems |
| MNA | 25134-21-8 | C10H10O3 / 178.18 | 178.18 | 142.4 | Liquid | Higher crosslink density, class H electrical |
| Nadic anhydride | 826-62-0 | C9H8O3 / 164.16 | 164.16 | 154.6 | Solid | High Tg, low melt viscosity |
| MHHPA | 25550-51-0 | C9H12O3 / 168.19 | 171.6 at 98% | Effectively 0 | Liquid | General purpose liquid anhydride, low colour |
| MTHPA | 11070-44-3 | C9H10O3 / 166.17 | 175.7 at 41% | 152.8 theoretical | Liquid | Cost-effective electrical grade |
The useful reading is the iodine value column. Three of these five hardeners are unsaturated and will yellow in service; two are saturated and will not. If a customer is fighting yellowing, the answer is not a UV stabiliser package – it is to move to a saturated anhydride and accept the small Tg penalty.
Dose and water budget
At EEW 185 and a stoichiometric ratio of 0.9, H-MNA runs at 87.7 phr (180.20 / 185 x 100 x 0.9). Two working numbers follow from the equivalent weight:
- 5.55 anhydride equivalents per kg – slightly fewer than MNA (5.61) because the molecule is marginally heavier.
- Water cost: 1 kg of water per tonne of hardener consumes 55.5 mol of anhydride, which is 10.0 kg of H-MNA, i.e. 1.0% of the batch. Free acid rises by roughly 1.1 percentage points for every 0.1% of water, so a resin/system water balance is the first thing to check when free acid drifts.
Where it is used
| Application | Why H-MNA | Note |
| Colour-critical electrical castings | No unsaturation, so no yellowing under thermal load | Pair with a colour-stable epoxy and a non-staining accelerator |
| Optical and light-stable encapsulants | Saturated backbone survives UV exposure | Check UV absorber compatibility with anhydride cure |
| White and pastel pigmented systems | Will not drift the pigment shade over time | Pigment moisture counts against the water budget |
| General casting where MNA is over-specified | Same handling as MNA with better colour retention | Expect slightly lower Tg |
Handling and storage
Store the liquid form in closed drums under dry air or nitrogen; moisture opens the anhydride ring and free acid climbs. Store the solid form below its melting range in a dry area – partial melting and re-solidification can consolidate a drum into one block. Do not heat either form above the temperature needed for processing: repeated melt cycles darken the product and raise free acid. Keep away from amines and from alkaline materials.
Packaging and supply
| Pack | Form | Note |
| 200 kg steel drum | Liquid | Standard export pack; nitrogen blanket on request |
| 25 kg fibre drum with PE liner | Solid | Keep dry; do not stack in direct sun |
| 1000 kg IBC | Liquid | For continuous casting lines |
Each lot ships with a COA covering appearance, purity and iodine value, with free acid and colour (Pt-Co / Gardner) reported on request. Export documents normally classify the product under HS 2917.20. When you enquire, tell us the form you can handle and the colour target – it decides which isomer fraction we allocate.
FAQ
Why do I receive a solid when I ordered a liquid? Same CAS, different isomer distribution. Ask for the crystallisation behaviour and the form in writing; a supplier quoting one CAS is not promising one physical state.
How do I confirm the lot is fully hydrogenated? Iodine value. Zero (or a few tenths) means the ring is saturated; anything near 140 means you have MNA, not H-MNA. Colour will not tell you this – a stabilised MNA can look water-white.
Is H-MNA a drop-in for MNA? On dose, close: 87.7 phr against 86.7 phr at EEW 185, r = 0.9, a 1.1% difference. On performance, you gain colour stability and lose some crosslink density and Tg.
Contact PolyBlueChem for a sample of the form you need, a lot COA and a quotation against your volume and destination port.
Related reading
- The anhydride family map: every product, the AEW scale and the identification traps
- Liquid anhydride hardeners for electrical casting: MNA, MTHPA and MHHPA
- Free acid, colour and storage: what hydrolysis does to an anhydride
- Methyl Nadic anhydride (MNA): viscosity, dose and class H casting




