Norbornane-2,3-Dicarboxylic Anhydride (Endo/Exo Mixture), No CAS

Norbornane-2,3-dicarboxylic anhydride (endo- and exo- mixture) is the saturated form of the better-known Nadic anhydride: the bridged bicyclic skeleton is the same, but the ring double bond has been hydrogenated away. The difference between the two is two hydrogen atoms on paper and a completely different service life in practice – the saturated version does not yellow.

This product has no CAS number. It is supplied and identified by name, molecular formula and melting range, and it must not be confused with Nadic anhydride (CAS 826-62-0), which is the unsaturated analogue and a different material. Buyers who substitute one for the other by name will find the error in a colour test months later.

Status: Specification below is the current production grade. Endo/exo ratio, melting range and acid value are confirmed per lot; ask for the COA with the isomer ratio stated, because that ratio is what separates this product from the pure-endo grade sold separately.

Basic Information

CAS Number Not assigned – identified by name
Chemical name Norbornane-2,3-dicarboxylic anhydride, endo- and exo- mixture; hexahydro-3,6-methanophthalic anhydride
Molecular Formula C9H10O3
Molecular Weight 166.17 g/mol
PubChem CID 96196 (structure entry for the norbornane skeleton)
InChIKey LQOPXMZSGSTGMF-UHFFFAOYSA-N
Chemical Family Bridged bicyclic alicyclic anhydride, saturated
Anhydride equivalent weight 166.17 g/eq
Iodine value, theoretical 0 – no carbon-carbon double bond

Specification

Item Requirement
Appearance White solid
Purity (assay) 98% min
Melting point 120 to 130 degC (mixed endo/exo)
Anhydride equivalent weight 166.17 g/eq
Acid value, after hydrolysis 675.5 mg KOH/g theoretical (2 carboxyl equivalents)
Iodine value Effectively 0

-ane against -ene: a two-letter difference that decides colour

Nadic anhydride (CAS 826-62-0, C9H8O3, 164.16) and this product (C9H10O3, 166.17) differ by one hydrogenated double bond. That double bond is where oxidation starts, and the visible consequence is yellowing of a casting or a laminate that was colourless when poured. The analytical consequence is iodine value:

Property Nadic anhydride (unsaturated) Norbornane-2,3-dicarboxylic anhydride (saturated)
CAS 826-62-0 Not assigned
Formula / MW C9H8O3 / 164.16 C9H10O3 / 166.17
Iodine value, theoretical 154.6 0
AEW 164.16 166.17
phr at EEW 185, r = 0.9 79.9 80.8
Colour stability in service Yellows – allylic oxidation Stable
Crosslink contribution from the ring Additional, via the double bond None – only the anhydride reacts

Note what the iodine value does here: it is the single test that separates the two materials. Colour cannot be trusted, because a stabilised unsaturated lot looks water-white on the day it is poured, and assay cannot be trusted, because both are “98% min”. A reading near 155 means you have Nadic; a reading near zero means you have the saturated product.

Endo/exo mixture against pure endo

The same chemistry is also sold as a single isomer, with a much higher melting point. The mixed grade is what most users want: it melts in a convenient range, flows well, and costs less. The pure-endo grade exists for processes that need a hard, high-melting solid – powder premixes that must not cake, or a guaranteed crystal form.

Grade Melting point Best for
Mixed endo/exo (this product) 120 to 130 degC General casting, impregnation, blends where a lower melt is easier
Pure endo 160 degC and above Powder systems, storage stability, single crystal form

Because there is no CAS number to anchor the identity, the melting range and the endo/exo ratio are the specification. Put both on the purchase order.

Where it is used

Application Role Note
Colour-critical electrical castings Saturated solid hardener with no yellowing pathway Pair with a colour-stable resin and a non-staining accelerator
Light-stable and outdoor systems No allylic oxidation site Confirm UV package compatibility with anhydride cure
High-Tg solid formulations Bridged ring gives rigidity with a low melt viscosity Melting step required; keep the melt covered
Blends with liquid anhydrides Raises Tg and hardness while staying processable Check crystallisation on cooling – blends can be unstable

Handling, packaging and supply

Store dry and cool in closed containers. The anhydride hydrolyses; free acid rises with moisture and with repeated melting. Supplied in 25 kg net fibre drums with polyethylene liner, or 25 kg bags for powder-handling plants. Because the product is identified by name rather than CAS, customs and product-registration paperwork needs the name, the formula and the melting range together – we will supply a technical data sheet with all three, plus the ester/ketone-free statement some markets ask for. COA covers appearance, assay, melting range and iodine value; endo/exo ratio by NMR on request.

FAQ

Is this the same as Nadic anhydride? No. Nadic anhydride is CAS 826-62-0 and still contains the ring double bond (iodine value 154.6). This is the hydrogenated product (166.17 g/mol, iodine value 0), identified by name because no CAS has been assigned.

Why does my supplier’s “norbornane anhydride” yellow? Either it is not fully hydrogenated – ask for the iodine value – or it is Nadic anhydride sold under a looser name. The iodine value settles it in one test.

Do I need the pure endo grade? Only if the process needs a hard, high-melting solid (160 degC and above) or a single crystal form. The mixed grade melts at 120 to 130 degC and is easier to handle.

Contact PolyBlueChem for a lot COA with iodine value, a sample and a quotation against your volume and destination port.

Related reading

Related Products

Scroll to Top