1,2,4-Cyclohexanetricarboxylic anhydride (CAS 53611-01-1) is the alicyclic counterpart of trimellitic anhydride: one anhydride ring and one free carboxylic acid on the same cyclohexane backbone. Two functional groups that react with epoxy at different rates, which makes it useful in powder coatings and laminating systems – and makes the usual “phr from AEW” calculation wrong if you ignore the acid.
Status: Specification below is the current production grade. Acid value, free acid and isomer ratio can be reported per lot; ask for the COA before you fix a formulation.
Basic Information
| CAS Number | 53611-01-1 |
| Chemical name | 1,2,4-Cyclohexanetricarboxylic anhydride; octahydro-1,3-dioxo-5-isobenzofurancarboxylic acid |
| Molecular Formula | C9H10O5 |
| Molecular Weight | 198.17 g/mol |
| PubChem CID | 15685501 |
| InChIKey | FWHUTKPMCKSUCV-UHFFFAOYSA-N |
| Chemical Family | Alicyclic anhydride-acid (dual functionality) |
| Functional groups | 1 anhydride ring + 1 free carboxylic acid |
Specification
| Item | Requirement |
| Appearance | White crystalline powder |
| Purity (assay) | 99% min |
| Anhydride equivalent weight | 198.17 g/eq (one anhydride group per molecule) |
| Acid value, after hydrolysis | 849.6 mg KOH/g theoretical (3 carboxyl equivalents: 2 from the opened anhydride, 1 already free) |
| Acid value, direct titration | 566.4 mg KOH/g theoretical (anhydride counted as one equivalent plus the free acid) |
The two acid values, and why you need both
This molecule is the clearest case in the whole anhydride family for reading two acid values rather than one, because the gap between them is a direct measure of how much of the anhydride ring is still closed:
- Direct titration (cold, no water) counts the free carboxyl and the anhydride ring as one equivalent each: 2 x 56.11 x 1000 / 198.17 = 566.4 mg KOH/g.
- After hydrolysis (water opens the ring first) the same molecule presents three carboxyls: 3 x 56.11 x 1000 / 198.17 = 849.6 mg KOH/g.
- A lot that has already taken up water sits below the two figures in a pattern: the hydrolysed acid value falls toward the direct value, because some rings have opened and are now counted by both methods.
For a supplier relationship this is a cheap way to police storage. For a formulator it is the reason a “99% assay” lot can still behave differently from the last one.
Dose: the acid is not a spectator
Epoxy reacts with an anhydride ring one-to-one under acceleration, and it also reacts with a free carboxylic acid, slower and often only at elevated temperature or with a catalyst. This molecule brings both:
| Counting method | Reactive equivalents per mole | Effective equivalent weight | phr at EEW 185, r = 0.9 |
| Anhydride only (the textbook calculation) | 1 | 198.17 | 96.4 |
| Anhydride + free acid (real network) | 2 | 99.09 | 48.2 |
The two answers are a factor of two apart, so pick deliberately. If the system is cured at moderate temperature with an accelerator, most of the acid does react and the 48 phr figure is closer to reality; if the cure is short and cool, part of the acid stays unreacted and the higher figure prevents an under-cured, brittle network. Most formulators land between the two and confirm by DSC or Tg measurement rather than by arithmetic.
Comparison
| Product | CAS | Formula / MW | Functionality | What it gives you |
| 1,2,4-Cyclohexanetricarboxylic anhydride | 53611-01-1 | C9H10O5 / 198.17 | 1 anhydride + 1 acid | High functionality, no aromatic colour, dual cure chemistry |
| Trimellitic anhydride (TMA) | 552-30-7 | C9H4O5 / 192.13 | 1 anhydride + 1 acid | Same topology, aromatic – cheaper, higher rigidity, more colour |
| HPMDA | 2754-41-8 | C10H8O6 / 224.17 | 2 anhydrides | Highest purity of function, alicyclic, colour-stable |
| Hexahydrophthalic anhydride (HHPA) | 85-42-7 | C8H10O3 / 154.16 | 1 anhydride | Simple alicyclic mono-anhydride benchmark |
The TMA comparison is the one buyers actually make: identical functional topology, 3% lighter, and a fraction of the cost – but aromatic, so it brings colour and it brings the stronger thermal yellowing. The cyclohexane version exists for the applications where colour and light stability outrank price.
Where it is used
| Application | Role | Note |
| Powder coatings (hybrid and polyester-epoxy) | Crosslinker with high functionality; solid, easy to dry-blend | Powder stability depends on the free acid – check blocking resistance |
| Electrical laminates and castings | High crosslink density with no aromatic colour | Two-stage cure recommended; the acid reacts later |
| Alkyd and polyester modification | Anhydride half-ester opens fast at 150 to 180 degC | Watch gelation – functionality is three if both routes are counted |
| Adhesion promoters and epoxy adducts | The free acid gives acid-epoxy adduct chemistry | Adduct viscosity rises quickly; run cool |
Handling, packaging and supply
Store dry and cool, in closed containers, away from amines and moisture. The free acid makes the powder slightly hygroscopic compared with a pure anhydride, so keep bags sealed and rotate stock. Supplied in 25 kg net paper bags with polyethylene liner, or 25 kg fibre drums for humid destinations; 500 kg FIBC on request. COA covers appearance, assay and acid value; water content and isomer ratio on request. Export classification normally follows HS 2917.20.
FAQ
Is this the same as trimellitic anhydride? Same functional topology, different backbone and different CAS. TMA is aromatic (C9H4O5, 192.13); this is the hydrogenated cyclohexane analogue (C9H10O5, 198.17). They are not interchangeable where colour matters.
How do I set the phr? Decide first whether the free acid is reacting in your cure schedule. Anhydride-only counting gives 96.4 phr at EEW 185, r = 0.9; counting both groups gives 48.2 phr. Confirm with Tg on a trial.
Why does my powder block in storage? Free acid plus moisture. Ask for the direct acid value and keep the bags sealed; blocking is a storage problem before it is a formulation problem.
Contact PolyBlueChem for a lot COA, a sample and a quotation against your volume and destination port.
Related reading
- The anhydride family map: every product, the AEW scale and the identification traps
- Anhydride curing agent dosage: phr from AEW and EEW
- Free acid, colour and storage: what hydrolysis does to an anhydride
- Tetrahydro versus hexahydro phthalic anhydride: the isomer comparison




