Dodecenylsuccinic anhydride is what a formulator reaches for when a rigid epoxy system has to stop cracking. It is a C16 alkenylsuccinic anhydride – a twelve-carbon chain carrying one double bond, welded onto the same five-membered anhydride ring that succinic anhydride uses to cure epoxy – formula C16H26O3, molecular weight 266.38, a pale yellow to yellow clear liquid at 99% minimum assay.
The number that decides everything about it is the anhydride content: 27.04% by weight. Roughly three quarters of the molecule is hydrocarbon that does no curing at all, and that is precisely why the product sells. Its working equivalent weight is 269, its dose at EEW 185 is 130.9 phr, and every kilogram of it brings a plasticiser into the mix for free. DDSA is not a hardener that happens to be flexible; it is a hardener bought because it is flexible.
The Family Follows a Straight Line
The alkenylsuccinic anhydrides are a homologous series, and the arithmetic of the series is the most useful tool for buying them. Add one methylene to the chain and both the molecular weight and the equivalent weight rise by 14.03; nothing else changes. Written out, an alkenylsuccinic anhydride with an n-carbon chain has the formula C(n+4)H(2n+2)O3 and a molecular weight of 14n + 98.
| Chain length n | Product | CAS | Formula | MW from 14n + 98 | Actual MW |
|---|---|---|---|---|---|
| 0 | Succinic anhydride | 108-30-5 | C4H4O3 | 100 (14n + 100, no chain) | 100.07 |
| 8 | Octenylsuccinic anhydride | 42482-06-4 | C12H18O3 | 210 | 210.27 |
| 9 | Nonenylsuccinic anhydride | 28928-97-4 | C13H20O3 | 224 | 224.30 |
| 12 | Dodecenylsuccinic anhydride | 26544-38-7 | C16H26O3 | 266 | 266.38 |
| 12, saturated | Dodecylsuccinic anhydride | 2561-85-5 (straight chain) | C16H28O3 | 268 (14n + 100) | 268.39 |
That line does three jobs at once. It lets you check whether a quoted chain length is consistent with the molecular weight on a certificate. It tells you the dose before you ask for a sample, because the equivalent weight follows the same slope. And it exposes the substitution that the market makes most often, because the saturated member of the family sits on a parallel line just two units above the unsaturated one.
Chain Length, Anhydride Content and Dose
Because the ring stays the same size while the chain grows, the anhydride content falls as the chain lengthens, and the dose rises with it:
| Product | Chain | Anhydride group | Equivalents per kg | phr at EEW 185, r 0.90 |
|---|---|---|---|---|
| Succinic anhydride | none | 71.97% | 9.94 | 48.9 |
| OSA | C8 | 34.25% | 4.71 | 103.3 |
| NSA | C9 | 32.11% | 4.41 | 110.2 |
| DDSA | C12 | 27.04% | 3.72 | 130.9 |
Compared with a ring anhydride the step is much bigger, because a dodecenyl chain is not a substituent on a ring – it is most of the molecule:
| Hardener | Working AEW | phr at EEW 185, r 0.90 | Relative to THPA |
|---|---|---|---|
| THPA (85-43-8) | 152.15 | 74.0 | – |
| MTHPA (11070-44-3), 41.0% min | 175.7 | 85.4 | +15% |
| NMA (25134-21-8), 98% | 181.8 | 88.5 | +20% |
| DDSA (26544-38-7), 99% | 269.1 | 130.9 | +77% |
What the Flexibility Actually Is
A cured epoxy network is stiff because the segments between crosslink points are short. An anhydride hardener sets both the number of crosslinks and the length of the segment that hangs off each one, because the anhydride becomes part of that segment. A ring anhydride contributes eight carbons; DDSA contributes sixteen, and twelve of them are a flexible chain with nothing to crosslink along it.
The consequences appear in four places at once, and a formulator should expect all four when making the change:
- Glass transition falls. Longer segments move at lower temperatures, so the temperature at which the network stops being rigid drops. How far depends on the resin and the ratio, which is why it belongs on a test plan rather than on a datasheet.
- Elongation and impact rise. The chain absorbs energy that a rigid segment transmits, which is the whole point in a potting compound that has to survive thermal cycling.
- Shrinkage falls. A larger fraction of the mix is a liquid that does not react, so the volume change on cure is smaller and the stress on an embedded component is lower.
- Pot life lengthens and the exotherm softens. Fewer reactive groups per kilogram means less heat per kilogram, released more slowly – welcome in a large casting, inconvenient in a fast assembly line.
What does not change is the chemistry. An anhydride ring opens against a hydroxyl and esterifies; the chain is a spectator. That is why the accelerator, the cure schedule and the post-cure all carry over from a short-chain system, and why the reformulation is about ratio rather than about process.
Blending for Intermediate Properties
Few systems use DDSA alone, because maximum flexibility is rarely what the drawing asks for. The usual route is a blend with a short-chain anhydride, and the blend equivalent weight is the harmonic mean of the two:
| Blend by mass | Blend AEW | phr at EEW 185, r 0.90 | Dose vs pure THPA |
|---|---|---|---|
| 100% THPA | 152.15 | 74.0 | – |
| 70 THPA / 30 DDSA | 175.0 | 85.1 | +15% |
| 50 THPA / 50 DDSA | 194.4 | 94.6 | +28% |
| 30 THPA / 70 DDSA | 218.7 | 106.4 | +44% |
| 100% DDSA | 269.1 | 130.9 | +77% |
Two warnings about the table. The blend equivalent weight is a harmonic mean, not a linear interpolation, so it moves further than the mass fraction suggests – 30% DDSA does not give a 30% change. And a blend is not a specification: if the flexibility is a drawing requirement, the ratio belongs on the batch record, because a hand-weighed 25/75 will not deliver the same modulus as a 30/70.
Water Is Expensive Here
The heavier the molecule, the more material one kilogram of water destroys, and DDSA is the heaviest common member of the family:
| Water in the drum | DDSA destroyed | Dodecenylsuccinic acid formed | Free acid reading |
|---|---|---|---|
| 0.01% (100 ppm) | 1.5 kg/t | 1.6 kg/t | +0.16 points |
| 0.05% (500 ppm) | 7.4 kg/t | 7.9 kg/t | +0.79 points |
| 0.10% (1 kg/t) | 14.8 kg/t | 15.8 kg/t | +1.58 points |
For comparison, the same kilogram of water destroys 5.6 kg of succinic anhydride and 9.9 kg of MNA. The reason is simple – a mole of water consumes a mole of anhydride, and a mole of DDSA weighs 266 grams – but the practical consequence is that a DDSA drum has a shorter working life in a humid plant than a drum of anything else on the shelf.
The product of that hydrolysis is a saleable material in its own right: dodecenylsuccinic acid, CAS 29658-97-7. It is not a substitute for the anhydride in a cure, because it reacts through carboxyls at a different rate and a different stoichiometry, but it is why a partly hydrolysed drum is not always a total loss.
Reverse conversion, useful when the certificate reports acid value instead of free acid: free acid percent as C16H30O4 equals acid value multiplied by 0.2534, and water in kg per tonne equals free acid percent divided by 1.58.
Two Hydrogens: DDSA Against Dodecylsuccinic Anhydride
The most expensive substitution in this family is not a wrong chain length; it is the right chain length without the double bond. Dodecylsuccinic anhydride – the saturated analogue – differs by two hydrogen atoms, 2.01 in molecular weight, and 0.7% in dose. Its iodine value is zero.
| Item | DDSA | Dodecylsuccinic anhydride (DSA) |
|---|---|---|
| CAS | 26544-38-7 | Not assigned as a branched mixture; straight chain 2561-85-5 |
| Molecular weight | 266.38 | 268.39 |
| Iodine value | About 95.3 | 0 to 1 |
| Working AEW at 99% | 269.1 | 271.1 |
| phr at EEW 185, r 0.90 | 130.9 | 131.9 |
| Colour stability on storage | Darkens; allylic oxidation | Stable |
Nothing on a mixing sheet separates them. What separates them is behaviour over time: the alkenyl chain carries allylic hydrogens, which are the weakest bonds in the molecule and the first thing oxygen attacks; the hydroperoxides decompose into carbonyls and the carbonyls are yellow. A DDSA drum that has been warm and part-full for a month will be visibly darker with its assay intact.
Which one is correct depends on what the double bond is for. If it is there to be reacted later – copolymerisation, addition, a subsequent functionalisation – buy DDSA. If the double bond is simply an impurity that oxidises and discolours, buy the saturated grade and pay for the hydrogenation. The iodine value on the certificate is the only reliable way to know which one arrived.
Where It Comes From
The chain is built by reacting a C12 olefin with maleic anhydride, and the olefin is normally a propylene tetramer rather than a pure alpha olefin. Propylene tetramer is itself a mixture of skeletal isomers, which is why commercial DDSA is described as an isomer mixture and why the CAS number corresponds to a defined structure that the product only approximates.
That detail matters at the purchasing desk. A certificate of analysis for a mixture-grade product is a statement about the mixture, not about the single molecule the CAS describes. Ask for the iodine value, the assay, the colour and the free acid, and treat the CAS as the entry point rather than the specification.
Applications
- Flexible and toughened epoxy. Potting and encapsulation of electronics that see thermal cycling; castings that must survive impact or differential expansion between insert and resin.
- Adhesives and sealants. Longer pot life, lower exotherm and better peel strength than a short-chain anhydride.
- Blend component. The standard way to move an existing THPA or MTHPA formulation from brittle to tough without changing the process.
- Lubricant and fuel additive intermediates. The alkenylsuccinic skeleton is the starting point for succinimide dispersants and corrosion inhibitors, where a polyamine is reacted onto the ring.
- Corrosion inhibition. Amide and imidazoline chemistry built on the long chain, for oilfield and refinery applications.
- Reactive paper sizing raw material. The alkenylsuccinic chemistry that sizes paper is the same chemistry; sizing grades are sold separately against a performance specification.
- Source of the diacid. Hydrolysis gives dodecenylsuccinic acid, sold for its own applications.
Storage and Handling
A liquid in steel drums and IBCs. Store indoors, 5 to 30 deg C, out of sunlight, bung tight. For holds beyond a few weeks, blanket the headspace with dry air or nitrogen: the product degrades by two routes at once, hydrolysis which raises free acid, and allylic oxidation which moves colour, and a part-full drum breathes both in with every temperature cycle.
Warm evenly when viscosity has to come down – a drum heater rather than a band heater on one side, because the free acid follows the hot spot. The material is an irritant and a skin sensitiser, reacts exothermically with amines, alkalis and alcohols, and hydrolyses with water. Local exhaust ventilation at the transfer point, gloves and eye protection; absorb spills and dispose of as chemical waste.
Buying Checklist
- Iodine value. Around 95.3 for DDSA; anything near zero is the saturated grade and a different product.
- Assay and its basis. Confirm it is anhydride content by titration, and ask for free acid alongside it.
- Free acid, converted to water. Divide the free acid percentage by 1.58 to get kg of water per tonne; that number tells you whether the drum was blanketed.
- Colour, with the basis stated. Pale yellow to yellow is the normal band for DDSA; a lot at the dark end has heat history.
- Chain length consistency. The molecular weight should sit near 266; if a supplier quotes 268, ask whether the product is saturated.
- Isomer and feedstock statement. A mixture based on propylene tetramer is normal; a straight-chain claim is possible but should be supported by data.
- Packaging and headspace. Drum size, liner and nitrogen blanking – this is what holds the free acid through transit.
FAQ
Is DDSA a curing agent or a flexibiliser?
Both, and that is the point of buying it. It carries one anhydride group, so it cures in the same way as any anhydride hardener, but 73% of the molecule is a hydrocarbon chain that softens the network. It is dosed as a hardener and paid for as a flexibiliser.
Why is the dose almost twice that of THPA?
Because the anhydride group is only 27% of the molecule by weight. The working equivalent weight is 269 against 152 for THPA, so at EEW 185 and r 0.90 the dose is 130.9 phr against 74.0. The extra weight is doing mechanical work, not chemical work.
Can DDSA be used alone in a casting?
Yes, with heat and an accelerator, and the result is a flexible casting with a low glass transition. Where stiffness or heat resistance is on the drawing, DDSA is blended rather than used alone.
How do I know I have DDSA and not the saturated grade?
The iodine value. DDSA reads about 95.3 g I2/100 g; dodecylsuccinic anhydride reads 0 to 1. Assay, colour and dose will not separate them – the dose differs by 0.7%.
Does the double bond react during cure?
Not with the epoxy. It is there for later chemistry, or it is there as an oxidation site. Which of those two it is decides whether you want DDSA or its saturated analogue.
Is DDSA the same as the ASA sold to paper mills?
Same chemistry, different specification. A sizing grade is sold against emulsion behaviour, hydrolysis limits and paper performance, and its chain distribution is chosen for sizing. Generic DDSA is an epoxy hardener and an intermediate; it is not qualified as a sizing agent.
What happens if a drum takes up water?
The anhydride opens and becomes dodecenylsuccinic acid – 14.8 kg of DDSA destroyed per kilogram of water per tonne, with a free acid rise of 1.58 points per 0.1% water. The diacid has its own applications but is not interchangeable in a cure.
References and Further Reading
- CAS 26544-38-7: dodecenylsuccinic anhydride; PubChem CID 6438029; InChIKey AMEIILZCUWMPEV-ONEGZZNKSA-N; C16H26O3, 266.38 g/mol.
- Homologous series basis: an n-carbon chain gives C(n+4)H(2n+2)O3 and a molecular weight of 14n + 98; the saturated analogue follows 14n + 100. Each methylene adds 14.03 to both molecular and equivalent weight.
- Anhydride basis: C2O3 = 72.02 g/mol; 72.02 / 266.38 = 27.04%; working AEW at 99% assay = 269.1 g/eq; theoretical acid value 421.3 mg KOH/g.
- Iodine value basis: 253.81 g/mol for I2 and one double bond per molecule, giving 95.3 g I2/100 g theoretical.
- Hydrolysis basis: DDSA + H2O gives C16H30O4 at 286.41 g/mol; 1 kg of water per tonne consumes 14.8 kg of anhydride and yields 15.8 kg of diacid, a free acid rise of 1.58 points.
- PolyBlueChem: DDSA product page; dodecylsuccinic anhydride (saturated analogue); dodecenylsuccinic acid.
- PolyBlueChem: alkenylsuccinic anhydrides: chain length and identity; anhydride dosage in phr; free acid, colour and storage.
Contact PolyBlueChem for a current certificate of analysis with iodine value and free acid, a sample for a flexibility trial, and a quotation for drum or IBC supply.